Details on Selecting Insulation Variant

Information on the Select insulation variant dialog in the panel heating system.

Defines the insulation variant and system-dependent insulation options for a selected panel system.

You are here:

Module overview ➤ Panel heating/Panel cooling ➤ Building structure ➤ Storey level ➤ Panel heating/Panel cooling ➤ Storey overview+ quick dimensioning ➤ R insulation, m²K/W ➤ Select insulation variant

The decisive factor is the type of use of the panel heating of the adjacent room or the nature of the adjacent material selected on the left side. According to the selection, the corresponding R-value according to the standard is adopted and used for the calculation.

R-value

According to the specification, the associated R-value based on the standard is applied and used for the calculation.

Insulation option (...)

Depending on the system, the manufacturer specifies different construction versions for one type of use. In this case, the buttons to select the different insulation options are activated.

Export image to CAD (dwg) If the manufacturer has stored a drawing for the insulation variant or insulation option, you can export it to the CAD program and position it at the desired location.

Export image to CAD (bmp) If the manufacturer has stored an image for the insulation variant or insulation option, you can export it to the CAD program and position it at the desired location.