This dialog provides information about the feed-in point of a pipe route system selected in the model. In feed-in points, you define which system classes from technical generation systems (boilers, potable water storage tanks, ventilation units) feed into the pipe route. The necessary system classes can be collected at a feed-in point and fed into the pipe route. For the heating and cooling system classes, system information such as differential temperature, flow and return temperatures for the respective pipe route is also defined here.
You are here
Feed Point
Location ( Drop-down List): When Automatically is selected, the feed-in location corresponds to the MEP space in which the feed-in point is located. If a pipe route ends in the floor or in a suspended ceiling, this drop-down list can be used to select whether the space above or below is the feed-in space.
Location (Name): Displays the name of the feeding space.
Name: Displays the name of the feed-in point.
System Class
New Entry: Opens a context menu that allows you to add a new system class to the feed-in point.
Remove Entry: Deletes the system class currently selected in the list from the feed-in point.
|
Element |
Meaning |
|---|---|
|
System |
Displays the system classes contained in the feed-in point. |
|
Pipe Route Identification |
Provides the option to enter a pipe route identifier. The pipe route identifier is used to differentiate between system classes when pipe routes contain multiple media pipes of the same type. The identifiers must either be empty or match on the feed-in/transfer side. |
|
Information |
Displays information about the system class. |