You are here
|
Parameter |
Meaning |
Use |
|---|---|---|
| LIN_CLASSIFICATION_LINEAR | Classification | Used to identify specific model elements, such as collection points or transfer points. |
| LIN_AN_ELEMENT_NAME | Element name | Used to identify model elements, i.e., pipe route elements, collection points, transfer points, and feed-in points. |
| LIN_BA_CALCULATED_HEATING_LOAD | Calculated heating load | Used when the sizing is to be based on existing external calculations, for example from LINEAR Building. |
| LIN_BA_DESIGN_HEATING_LOAD_DENSITY | Specific heating load (planned value) | Used to estimate the room heating load based on the floor area. |
| LIN_BA_CALCULATED_COOLING_LOAD | Calculated cooling load | Used when the sizing is to be based on existing external calculations, for example from LINEAR Building. |
| LIN_BA_DESIGN_COOLING_LOAD_DENSITY | Specific cooling load (planning value) | Used to estimate the room cooling load based on the floor area. |
| LIN_BA_MECHANICAL_SUPPLY_AIR_FLOWRATE | Supply Air Volume Flow Rate | Used when the sizing is to be based on existing external calculations, for example from LINEAR Building. |
| LIN_BA_MECHANICAL_EXTRACT_AIR_FLOWRATE | Extract Air Volume Flow Rate | Used when the sizing is to be based on existing external calculations, for example from LINEAR Building. |
| LIN_CP_DESIGN_AIR_CHANGE_RATE | Minimum Air Exchange Rate | Used to estimate the supply and exhaust air volume flow rates based on the room volume. |
| LIN_BA_VENTILATION_SYSTEM | Type of ventilation system (no ventilation, supply and extract air, extract air, supply air) | Used in addition to the minimum air change rate for simplified air flow rate determination. Example: In a plain extract air room, there is no need for supply air. |
| LIN_CP_DESIGN_NUMBER_OF_KITCHENS | Number of utility kitchens | Parameter for suggestion value, if the sanitary flow rates are to be calculated based on target values from the room data. |
| LIN_CP_DESIGN_NUMBER_OF_SHOWERS | Number of Showers | Parameter for suggestion value, if the sanitary flow rates are to be calculated based on target values from the room data. |
| LIN_CP_DESIGN_NUMBER_OF_TOILETS | Number of Toilets | Parameter for suggestion value, if the sanitary flow rates are to be calculated based on target values from the room data. |
| LIN_CP_DESIGN_NUMBER_OF_URINALS | Number of Urinals | Parameter for suggestion value, if the sanitary flow rates are to be calculated based on target values from the room data. |
| LIN_CP_DESIGN_NUMBER_OF_WASHBASINS | Number of sinks | Parameter for suggestion value, if the sanitary flow rates are to be calculated based on target values from the room data. |