You are here:
Hydraulic Balancing
Enabled: Hydraulic balancing is performed after the calculation. After hydraulic balancing a valve setting is given out for each throttle and regulating valve (e.g. Radiator valves, regulating valves).
Disabled: If you switch off the hydraulic balancing, you can view the pipe network with open valves or with set minimum pressure losses.
Leave Valves Open
Enabled: All regulating and throttling valves remain open during calculation. In the calculation results, you can see the pressure difference of each individual flow path and pipe section, and which flow path is the most unfavorable.
Preset Minimum Pressure Losses
Enabled: The minimum pressure losses of the valves are taken into account for calculation but no further settings of the throttle- or regulating valves are made.