Details on Visualization filter
Information about the Visualization filter dialog in the visualization of the Pipe and Air Duct Network Calculation.
You are here:
Applies to: Heating, cooling, Potable water, Waste water, Ventilation, Panel heating/cooling, Gas.
Information type
In the upper part of the dialog, the type of information represented by the visualization is indicated with the corresponding unit, e.g. mass flow [kg/h].
Min / Max
In these fields you enter the lower and upper limit values for the visualization of the pipe network data. If the predefined value range is changed, pipe network sections with values outside the range are no longer highlighted in color.
Intervalls
Specify the number of intervals into which the predefined value range for visualization is to be divided. The color scale is automatically adjusted when a new division is made.
Apply / Reset
Use the Apply button to apply changed settings to the visualization. Use the Reset button to reset the settings to the original values.
Color scale
The number of color fields corresponds to the number of set intervals. A color field is assigned to each value interval to identify the pipe sections whose values lie within the value interval. Click on one of the color fields to limit the visualization in the model to the value interval associated with that color field. If you click on the field again, the filter will be removed.