Labeling Provisions for Void

Shows step-by-step how to label provision for void.

Before you begin

You have placed provision for void and want to label them with dimensions and other properties.

Requirement:

Provisions for void are already included in the project.

Navigate to:

Project tab ➤ Void planning discipline ➤ Construction tab

Procedure

  1. Open the Labeling < section.
  2. Select the void type and the distance to be labeled from the drop-down list.

    All other label characteristics are taken from the properties of the provisions for void.

  3. Click Labeling<.
  4. Select the provision for void to be labeled and place the label.

Results

The provision for void is labeled with the void type, the discipline of the intersecting pipe or duct, the dimensions of the void and the selected distance (BEC or UEUFL).