Details on Component Data for the Partial Network End
Information on the component data dialog for sub-network ends in the Rohrnetzberechnung Quartiersnetze.
In this dialog, you define the component data configurations for sub-network ends in the Rohrnetzberechnung Quartiersnetze on the first tab. On the second tab, you define the prioritization for the item sets of the sub-network end.
You can use the sub-network end to consider heat interface units that are not drawn in the calculation. This allows you to factor in future network expansions into your calculations. You can either enter the heat capacity or the mass flow rate directly in the technical data or make a detailed entry of the individual values for differently configured heat interface units in the dialog Heat Interface Units in the Sub-network . The resulting capacity outputs are then analyzed and applied to the component data of the sub-network end.
You are here:
Name
In this field you can enter an individual name for the component. Clicking on 
restores the original name and overwrites the previous entry.
Settings tab
Design Temperature: In this area, you define the flow and return temperature of the consumers that represent the sub-network end.
Output of Capacities
: Opens the dialog Heat Interface Unit in Sub-network, in which you enter the values for the heat interface units that represent the sub-network end. The resulting capacity outputs for the heat interface units is determined from the data and applied to the component data of the sub-network end.
Heat Capacity and Mass Flow Rate: Enter either the Heat Capacity or the Mass Flow Rate. The other value is calculated automatically depending on the flow and return temperature.
Pressure Loss Data
Pressure Loss: Determines the pressure loss of the consumers that the sub-network end represents.
Water Volume: Defines the water volume of the consumers that the sub-network end represents.
Material tab
On the second tab, you define the local prioritization for the component's article sets. Global configurations defined in the Priorities (...)dialog for sub-network ends in the Connection Sets column of the Pipes and Connection Sets dialog are overwritten for this component if necessary.
Connection Sets: Table for prioritizing individual sets of items. Select a row, then use the 
and 
buttons to adjust the order for prioritizing the item sets.
Reset: Resets the order to the one specified in the corresponding Priorities (…) dialog for building connections, which is defined via the Pipes and Connection Sets dialog.