Details on the section “Components” (District Networks)
Information on the Components area in the Rohrnetzberechnung Quartiersnetze
In this area you will find all functions for definition, adjustment and transfer of component data.
You are here
All configurations that you make in the Components area are saved to the components and pipes of the project.
Classify ...
Opens the Classify - (...) dialog after the selection of components, in which the calculation types of the selected components are displayed and can be adjusted if necessary. Alternatively, you can also carry out the component selection before activating the function.
If there are unclassified components in the drawing, you must assign your classifications and thus the calculation types to these components via this dialog so that calculation of the district network is possible.
For a detailed description, please refer to the relevant help page, which is linked at the bottom of this page under “Related Interface Elements.
Technical Data ...
After selecting a component, this button opens the corresponding component dialog, in which technical data relevant for the calculation for that particular component can be entered. Alternatively, you can also carry out the selection of a component before activating the function.
You can find more information in the About Technical Data help section, which is located on the left in the tree structure below this page.
Copy <
Copies the technical data from the component dialogs and the lengths of edited pipes if the corresponding checkboxes are activated.
First select the original component or pipe for which you want to copy the data. Then transfer the copied data to a selection of components or to all components of the same type.
You can find step-by-step instructions on the help page for Copy Settings, located in the About Technical Data help section.
| Element | Description |
|---|---|
| Component Data | Enabled: The component type, the technical data from the component dialogs and any assigned connections of the original component are copied. For pipes, the definition of the pipe materials is copied. |
| Lengths | Enabled: Edited lengths of pipes are copied. |
| For All Components | Enabled: When copying, the data of the original component is copied for all components of the same type or all pipes. Disabled: Select the components or pipes that will receive the copied data of the original component. |
Reset <
Resets changed technical data or edited lengths of pipes if the corresponding checkboxes are activated. The reset can be carried out for all components of the same type or for a selection.
| Element | Description |
|---|---|
| Component Data | Enabled: The component type, the technical data from the component dialogs and any assigned connections of the original component are reset. For pipes, the definition of the pipe material is reset. |
| Lengths | Enabled: Edited lengths of pipes are reset. |
| For All Components | Enabled: The data of all components of the same type or of all pipes are reset. Disabled: Select the components or pipes whose data is to be reset. |