LINEAR Solutions 26 for AutoCAD

Inserting Elevation Points on Certain Trench Sections

Shows step-by-step how to add elevation points to certain trench sections of a district network.

Before you begin

You want to assign elevation points to certain trench sections of a district network.

Requirements

  • The location is already defined in the drawing.
  • Elevation data is already inserted in the drawing.

Navigate to

Project-Tab ➤ Discipline District Networks ➤ Labeling and Output" tab ➤ Command group "Label Objects"

Command group “Label Components” of the discipline District Networks in the LINEAR Solutions for Autodesk AutoCAD

Procedure

  1. If necessary, open the section Elevation Points.
    Opened area Elevation Points
  2. Enter the Basic Height.
  3. Optional: Click Folder Symbol and select a *.DWG file for the rendering of elevation points in the drawing in the file explorer that appears.
  4. Select the Trench Sections option as the Insertion Method.
  5. Click on Insert Elevation Points ....
  6. In the drawing, click to select the trench sections into which elevation points are to be inserted and then confirm your selection with Entry.
    The following message appears:
    Notification: The elevation points on the selected trench sections are inserted after the next calculation
  7. Click OK.
  8. Switch to the Analyse tab and click on Calculation ....
    The calculation dialog opens and elevations points are drawn on the corresponding trench sections.
  9. Close the calculation dialog.

Results

You have assigned elevation points to certain trench sections of the district network.