LINEAR Solutions 26 for AutoCAD

Inserting Elevation Points on the Critical Path

Shows step by step how to add elevation points to the critical path of a district network.

Before you begin

You want to add elevation points to the critical path of a district network.

Requirements

  • The location is already defined in the drawing.
  • Elevation data is already inserted in the drawing.

Navigate to

Project-Tab ➤ Discipline District Networks ➤ Labeling and Output" tab ➤ Command group "Label Objects"

Command group “Label Components” of the discipline District Networks in the LINEAR Solutions for Autodesk AutoCAD

Procedure

  1. If necessary, open the section Elevation Points.
    Opened area Elevation Points
  2. Enter the Basic Height.
  3. Optional: Click Folder Symbol and select a *.DWG file for the rendering of elevation points in the drawing in the file explorer that appears.
  4. Select the Critical Path option as the Insertion Method.
  5. Click on Insert Elevation Points ....
    The following message appears:
    Notification: The elevation points along the critical path will be included in the next calculation
  6. Click OK.
  7. Switch to the Analyse tab and click on Calculation ....
    The calculation dialog opens and elevations points are drawn on the corresponding trench sections.
  8. Close the calculation dialog.

Results

You have provided the critical path of the district network with elevation points.

What to do next

Label the elevation points with the Label Objects < function if necessary.