LINEAR Solutions 26 for AutoCAD

Details on "Elevation Points"

Information on the Elevation Points section of the District Networks discipline.

In this area, you can insert elevation points that can be labeled into your drawing, or define where elevation points are to be drawn into trench sections after a new calculation. You can also set that the most unfavorable flow path of the district network is provided with elevation points after a new calculation. The prerequisite for inserting elevation points is that you have added a location and elevation data in your drawing and the option Consider Elevation Data is activated in the Settings. In order for the elevation points to receive values, you must calculate the district network with the option activated.

You are here

Project-Tab ➤ Discipline District Networks ➤ Labeling and Output" tab ➤ Command group "Label Objects"

Elevation Data for the Discipline District Networks in the LINEAR Solutions for Autodesk AutoCAD

Basic Height

Defines the insertion height of the elevation points relative to sea level.

Rendering of Elevation Points in the Drawing

Indicates the *.DWG file used for the rendering of elevation points in the drawing.

Folder Symbol: Opens the file explorer to select a *.DWG file for rendering of elevation points.

Insertion Method

Drop-down list to select a method to add elevation points You can use several methods to add elevation points if required. The following methods are available:

  • Individual Points: After clicking on Insert Elevation Points ... you can select individual points in the drawing where elevation points are to be inserted. Confirm your selection with Enterto draw in the points.
  • Area: After clicking on Insert Elevation Points ... you can use the selection frame to define an area in the drawing in which elevation points are to be inserted. After defining the selection frame, enter the number of elevation points per kilometer in the command line. Once the input has been confirmed, the elevation points will be drawn into the area.
  • Flow and Return: After clicking on Insert Elevation Points ... elevation points are inserted into the flow and return pipes. Movement of the cursor into the drawing area makes the inserted elevation points visible.
  • Flow: Click on Insert Elevation Points ... to insert elevation points into the flow pipes. Movement of the cursor into the drawing area makes the inserted elevation points visible.
  • Return: Click on Insert Elevation Points ... to insert elevation points into the return pipes. Movement of the cursor into the drawing area makes the inserted elevation points visible.
  • Trench Sections: After clicking on Insert Elevation Points ..., you can click in the drawing to select individual trench sections into which elevation points are inserted after confirmation with Enter and subsequent calculation.
  • Critical Path: After clicking on Insert Elevation Points ... and then performing the calculation, elevation points are inserted into the critical path.

Insert Elevation Points …

Activates the insertion of elevation points according to the selected Insertion Method.

Remove Elevation Points…

Removes all elevation points from the drawing.

Tip: If necessary, use the standard procedure for removing drawing elements with the Delete key to remove only certain elevation points.