LINEAR Solutions 26 for AutoCAD

Inserting Elevation Points into Drawing Areas

Shows step-by-step how to add areas with elevation points to your drawing and how to set the density of the grids.

Before you begin

You want to add elevation point grids to certain areas of your drawing.

Requirements

  • The location is already defined in the drawing.
  • Elevation data is already inserted in the drawing.

Navigate to

Project-Tab ➤ Discipline District Networks ➤ Labeling and Output" tab ➤ Command group "Label Objects"

Command group “Label Components” of the discipline District Networks in the LINEAR Solutions for Autodesk AutoCAD

Procedure

  1. If necessary, open the section Elevation Points.
    Opened area Elevation Points
  2. Enter the Basic Height.
  3. Optional: Click Folder Symbol and select a *.DWG file for the rendering of elevation points in the drawing in the file explorer that appears.
  4. Select the Areaoption as the Insertion Method .
  5. Click on Insert Elevation Points ....
  6. In the drawing, first click on the first corner and then on the second corner of the area to be provided with elevation points.
  7. In the command line, enter the number of elevation points per kilometer to be displayed in the area and confirm your selection with Enter.
    The elevation points are inserted in the defined area.
  8. Repeat the procedure for the next areas of your drawing if necessary.

Results

You have added areas with elevation points to your drawing.

What to do next

Label the elevation points with the Label Objects < function if necessary.