Knowledge Base Revit
Analyzing Buildings
Get information about the requirements analysis of a building. The demand analysis includes the calculation of the heat load, the cooling load and the ventilation concept.
Domestic Ventilation According to DIN 1946-6
Explains the concept of the modules for domestic ventilation according to DIN 1946-6.
About the Settings
Explains the concept of the settings in the context of domestic ventilation.
About the Occupancy of Rooms with Persons
Explains the concept of occupancy of supply air rooms with persons for determining the supply air volume flow.
Dividing the Number of People per Ventilation Zone
Shows step-by-step how to configure the distribution of people per ventilation zone.

New Features
Learn about new features in LINEAR software.
System Requirements
Learn more about the system requirements for using the LINEAR solutions.
Supported Norms and Standards
Learn which norms and standards support the LINEAR Solutions modules.
LINEAR Installation and Administration
Learn how to install, your LINEAR software, license and keep it up to date.
Getting Started
Get basic information about the structure, function, and interaction of the LINEAR Solutions programs in Revit and LINEAR Building.
Preparing Building
Learn how architects prepare plans and models to create a building model for building analysis.
Pre-conception design
Learn how to plan the positionining and dimensioning of technical control centers and create the route concept in collaboration with all parties involved in the planning.
Analyzing Buildings
Get information about the requirements analysis of a building. The demand analysis includes the calculation of the heat load, the cooling load and the ventilation concept.
- Heat Load
  Select a calculation basis for the calculation of the heat load according to the location and requirements of your project.
- Cooling Load Short Procedure
  Learn how to calculate a cooling load for your building based on the short procedure of VDI 2078 (1996), section 6.
- Cooling Load Dynamic
  Select a method for determining the cooling load to suit the location and requirements of your project.
- Domestic Ventilation According to DIN 1946-6
  Explains the concept of the modules for domestic ventilation according to DIN 1946-6.
  - About Building Detection
    Explains the building detection concept in relation to the heat load calculation.
  - About the Settings
    Explains the concept of the settings in the context of domestic ventilation.
    - About Location and Climate Data sets
      Explains the concept of location and climate data sets in .
    - Editing General Concept Data
      Shows step-by-step how to set the general concept data to suit your project.
    - Details on General Concept Data
      Information about the General concept data dialog in the concept of domestic ventilation according to DIN 1946-6.
    - About Room Types
      Explains the concept of room types in the domestic ventilation concept.
    - About the Occupancy of Rooms with Persons
      Explains the concept of occupancy of supply air rooms with persons for determining the supply air volume flow.
      - Configuring Occupancy according to Standard Occupancy
        Shows step-by-step how to configure the number of people for supply air rooms according to standard occupancy.
      - Dividing the Number of People per Ventilation Zone
        Shows step-by-step how to configure the distribution of people per ventilation zone.
    - About Distribution Factors for Supply Air Rooms
      Explains the concept of distribution factors for supply air rooms in fan-assisted ventilation systems.
  - About the Selection of Ventilation Concepts
    Explains which ventilation concepts you can choose and how to assign the same ventilation concept to all ventilation zones.
  - Checking Results of the Ventilation Concept
    Shows step-by-step how to check whether ventilation measures are required for a ventilation zone.
  - Switch to dimensioning
    Shows step-by-step how to switch to the dimensioning of the ventilation zones after creating a domestic ventilation concept.
Dimensioning Components
Learn how radiators, convectors, panel heating/cooling systems and concrete core activation systems and components of ventilation systems are designed based on the requirement analysis in LINEAR Building.
Inserting Components
Learn how to insert components from the LINEAR CAD Browser, from the libraries and configurators of the Library tab or from LINEAR Building into a model.
Constructing Networks
Learn how to create pipe and duct networks, design slots and openings and manage discipline-related reports and tasks.
Calculating Networks
Learn how to calculate pipe and duct networks.
Creating a Scheme
Get information on the workflow Scheme for the discipline Potable Water in Revit.
Construction Design
Get information about the workflow Construction design in connection with pipe and duct networks.
Labeling
Learn how to label section parts and components in the model.
Output
Obtain information on the output of calculation results and material extracts in your CAD program in LINEAR Building. In addition, find out how you can customize the layout of the output documents using the print mask editor.
Troubleshooting
Get information about possible sources of errors when working with LINEAR Solutions.

Dividing the Number of People per Ventilation Zone

Shows step-by-step how to configure the distribution of people per ventilation zone.

Before you begin

You want to configure the number of people per ventilation zone to determine outdoor air volume flow rates based on the number of people.

Requirements:

All rooms have the correct room type.

Navigate to:

Ribbon ➤ Configuration ➤ Domestic Ventilation

Procedure

In the Supply air volume flow (Mechanical) area, select the Split people entry from the drop-down list and close the Configuration by clicking OK.
Switch to the first ventilation zone and enter the expected Number of people in the Ventilation zone settings area.
The number of people entered is distributed evenly across all bedrooms, starting with the room with the highest supply air factor. If the distribution of people is uneven, the room with the highest supply air factor will receive the larger number of people.
Repeat the entry of people for all relevant ventilation zones.

Note: You can manually adjust the number of people per room at ventilation zone level. Manual entries have priority over automatic assignment.

Results

The number of people to be expected is divided per ventilation zone and is taken into account when determining air volume flows.

Name	Purpose	Lifetime	Type	Provider
CookieConsent	Saves your consent to using cookies.	1 year	HTML	Website
fe_typo_user	Assigns your browser to a session on the server.	session	HTTP	Website

Name	Purpose	Lifetime	Type	Provider
_ga	Used to distinguish users.	2 years	HTML	Google
_gat	Used to throttle request rate.	1 day	HTML	Google
_gid	Used to distinguish users.	1 day	HTML	Google
_ga_QTGLMF6700	Google Analytics cookie to throttle the request rate.	2 years	HTML	Google
_gcl_au	Used by Google AdSense to experiment with advertisement efficiency.	3 months	HTML	Google
_clck	Persists the Clarity User ID and preferences, unique to that site, on the browser. This ensures that behavior in subsequent visits to the same site will be attributed to the same user ID.	1 years	HTML	Microsoft
_clsk	Connects multiple page views by a user into a single Clarity session recording.	366 day	HTML	Microsoft
_uetsid	This is a tracking cookie used by Microsoft Bing Ads. It allows us to target a user who has visited our website before.	1 day	HTML	Microsoft
_uetvid	Used to track visitors across multiple websites to present relevant advertising based on the visitor's preferences.	390 day	HTML	Microsoft
ln_or	Registers statistical data on users’ behaviour on the website. Used for internal anyalyzes by the website operator.	1 day	HTML	LinkedIn

LINEAIR VOOR AUTODESK REVIT

LINEAIR VOOR AUTODESK AUTOCAD

Dividing the Number of People per Ventilation Zone

Before you begin

Navigate to:

Procedure

Results