Knowledge Base AutoCAD
Calculating Networks
Learn how to calculate pipe and duct networks.
About the Pipe Network Calculation of District Networks
Explains the concept of the Rohrnetzberechnung Quartiersnetze.
Settings
Explains the concept of the Settings in the Rohr- und Kanalnetzberechnungs.
Material Data
Explains the concept of material data in the pipe network calculations Heating, Potable Water, Waste Water, Cooling and District Networks.
Details on "Material Data"
Information on the Material Data area in the Analyse command group of the Analyse tab in the Rohrnetzberechnung Quartiersnetze.
Set Default Material
Shows step-by-step how to set default material for automatic assignment in the Rohrnetzberechnung Quartiersnetze your project.

New Features
Learn about new features in LINEAR software.
System Requirements
Learn more about the system requirements for using the LINEAR solutions.
Supported Norms and Standards
Learn which norms and standards support the LINEAR Solutions modules.
LINEAR Installation and Administration
Learn how to install, your LINEAR software, license and keep it up to date.
Getting Started
Get basic information about the structure, function and interaction of the LINEAR Solutions programs in AutoCAD and LINEAR Building.
Preparing and Editing Buildings and Architecture
Learn how to prepare drawings provided by an architect to create an architecture for building analysis.
Analyzing Buildings
Get information about the demands analysis of a building with LINEAR Building. The demands analysis includes the calculation of the heat load, the cooling load and the determination of the required air volumes.
Dimensioning Components
Learn how radiators, convectors, panel heating/cooling systems and concrete core activation systems and components of ventilation systems are designed based on the requirement analysis in LINEAR Building.
Create Pipe Run Scheme
Learn how to create pipe run schemes for pipe networks in LINEAR Building.
Calculate Pipe Run Schemes
Learn how to calculate pipe run schemes in LINEAR Building.
Inserting Components
Learn how to transfer radiators or chilled beams to a LINEAR Building connected CAD platform and insert symbols and components from the libraries into CAD.
Drawing Networks
Learn how to draw pipe and duct networks, connect components, generate schemes, and create slots and openings.
Calculating Networks
Learn how to calculate pipe and duct networks.
- Requirements for a Calculable Pipe and Duct Network
  Explains the requirements for a calculable pipe and duct network.
- About Classification
  Explains the concept of classifying components for the Rohr- und Kanalnetzberechnung.
- About Virtual Components
  Explains the concept of virtual components in pipe and duct network calculations.
- About Pipe Network Calculation Heating and Cooling
  Explains the concept of the pipe network calculation for heating and cooling.
- About Pipe Network Calculation Potable Water
  Explains the concept of the Rohrnetzberechnung Trinkwasser.
- About the Pipe Network Calculation for Wastewater and Roof Drainage
  Explains the concept of the Rohrnetzberechnung Abwasser.
- About the Air Duct Network Calculation
  Explains the concept of the Kanalnetzberechnung.
- About Pipe Network Calculation for Gas
  Explains the concept of the Rohrnetzberechnung Gas.
- About the Pipe Network Calculation of District Networks
  Explains the concept of the Rohrnetzberechnung Quartiersnetze.
  - Settings
    Explains the concept of the Settings in the Rohr- und Kanalnetzberechnungs.
    - General Settings
      Explains the concept of general settings and boundary conditions in the Rohrnetzberechnung Quartiersnetze.
    - Valves
      Explains the role of valves in pipe network calculations for heating, domestic water, cooling and district networks.
    - Curve Data
      Explains the concept of curve data for use in the calculation of pressure losses for duct components or valves.
    - Material Data
      Explains the concept of material data in the pipe network calculations Heating, Potable Water, Waste Water, Cooling and District Networks.
      - Details on "Material Data"
        Information on the Material Data area in the Analyse command group of the Analyse tab in the Rohrnetzberechnung Quartiersnetze.
        Set Default Material
        Shows step-by-step how to set default material for automatic assignment in the Rohrnetzberechnung Quartiersnetze your project.
        Creating a Custom Material Combination
        Shows step-by-step how to create a custom material combination in the Rohrnetzberechnung Quartiersnetze .
        Manually Assigning Material Combination
        Shows step-by-step how to manually assign material combinations to pipes in Rohrnetzberechnung Quartiersnetze .
        Performing a Manual Material Change
        Shows step by step how to carry out a manual change of material on the inside of a trench section in Rohrnetzberechnung Quartiersnetze .
        Define Connection Sets for Material Combinations
        Shows step-by-step how to define connection sets for the primary and secondary system of material combinations in the Rohrnetzberechnung Quartiersnetze.
        Specify Delivery Options for Pipe Systems
        Shows step-by-step how to define delivery options for pipe systems in the Rohrnetzberechnung Quartiersnetze .
        Details on "Pipes and Connection Sets"
        Information on the Pipes and Connection Sets dialog in the Rohrnetzberechnung Quartiersnetze.
    - Components
      Explains the concept of the Components section in Rohr- und Kanalnetzberechnungs.
  - Calculation
    Explains the concept of the calculation dialog in the Rohrnetzberechnung Quartiersnetze.
  - Pumps
    Explains the concept of Pumps in pipe network calculations for heating, potable water,, cooling and district networks.
- About Reports (Command Group)
  Explains the concept of the Reports command group on the Analyse tab of the Control Board.
Labeling and Dimensioning
Learn how to label components and sections in your drawing and how to dimension your drawing.
Output
Get basic information on creating output with AutoCAD, output in LINEAR Building and on the print mask editor.

Set Default Material

Shows step-by-step how to set default material for automatic assignment in the Rohrnetzberechnung Quartiersnetze your project.

Before you begin

You want to specify which material is assigned to the pipes in the project by default during calculation.

Navigate to

Project-Tab ➤ Discipline District Networks ➤ Analyse tab ➤ Command group Analyse ➤ Material Data ➤ Pipes and Connection Sets ...

Dialog "Pipes and Connection Sets" of the Discipline District Networks in the LINEAR Solutions for Autodesk AutoCAD

Procedure

In the first row of the Default Material Combination entry, specify the pipe material for the primary system by clicking on in the Lines/Pipes column .
The Pipe Tables dialog opens.
Select the desired Manufacturer, the desired System and, if applicable, the desired versions of the system in the table above.
Close certain nominal diameters of the system for sizing by unchecking the corresponding entries in the Active column in the table below.
Close the dialog with OK.
In the same way, specify the desired pipe material for the secondary system in the second row of the entry Default Material Combination.
For the primary system, in the Max. DN column, specify the nominal diameter up to which the primary system is used.
In the Preferred Insulation Level column, specify the desired insulation level for the primary and secondary systems.
Close the dialog with OK.

Results

The material combination is automatically assigned to the pipes of the project during calculation of the pipe network. Material combinations assigned manually are not overwritten.

Name	Zweck	Lebensdauer	Typ	Anbieter
CookieConsent	Speichert Ihre Einwilligung zur Verwendung von Cookies.	1 Jahr	HTML	Website
fe_typo_user	Ordnet Ihrem Browser eine Sitzung auf dem Server zu.	Sitzung	HTTP	Website

Name	Zweck	Lebensdauer	Typ	Anbieter
_ga	Wird verwendet, um Nutzer zu unterscheiden.	2 Jahre	HTML	Google
_gat	Wird verwendet, um die Anfragerate zu drosseln.	1 Tag	HTML	Google
_gid	Wird verwendet, um Nutzer zu unterscheiden.	1 Tag	HTML	Google
_ga_QTGLMF6700	Google Analytics Cookie der dazu dient die Anfragerate zu reduzieren.	2 Jahre	HTML	Google
_gcl_au	Wird von Google AdSense verwendet, um die Effizienz von Werbung zu testen.	3 Monate	HTML	Google
_clck	Speichert die Clarity-Benutzer-ID und die Einstellungen, die nur für diese Website gelten, im Browser. Dadurch wird sichergestellt, dass das Verhalten bei späteren Besuchen derselben Website der gleichen Benutzerkennung zugeordnet wird.	1 Jahre	HTML	Microsoft
_clsk	Verbindet mehrere Seitenaufrufe eines Benutzers zu einer einzigen Clarity-Sitzungsaufzeichnung.	366 Tag	HTML	Microsoft
_uetsid	Dies ist ein von Microsoft Bing Ads verwendetes Tracking Cookie. Es ermöglicht uns, auf einen Nutzer einzugehen, der bereits im Vorfeld unsere Webseite besucht hat.	1 Tag	HTML	Microsoft
_uetvid	Wird verwendet, um Besucher auf mehreren Webseiten zu verfolgen, um relevante Werbung basierend auf den Präferenzen des Besuchers zu präsentieren.	390 Tag	HTML	Microsoft
ln_or	Registriert statistische Daten über das Verhalten der Nutzer auf der Website. Wird vom Betreiber der Website für interne Analysen verwendet.	1 Tag	HTML	LinkedIn

LINEAR FÜR AUTODESK REVIT

LINEAR FÜR AUTODESK AUTOCAD

Set Default Material

Before you begin

Navigate to

Procedure

Results