Knowledge Base AutoCAD
Calculating Networks
Learn how to calculate pipe and duct networks.
About the Pipe Network Calculation of District Networks
Explains the concept of the Rohrnetzberechnung Quartiersnetze.
Settings
Explains the concept of the Settings in the Rohr- und Kanalnetzberechnungs.
Material Data
Explains the concept of material data in the pipe network calculations Heating, Potable Water, Waste Water, Cooling and District Networks.
Details on "Material Data"
Information on the Material Data area in the Analyse command group of the Analyse tab in the Rohrnetzberechnung Quartiersnetze.
Details on "Pipes and Connection Sets"
Information on the Pipes and Connection Sets dialog in the Rohrnetzberechnung Quartiersnetze.
Details zu "Lieferoptioneneinstellungen"
Information about the Delivery Options Settings dialog of the Rohrnetzberechnung Quartiersnetze.

New Features
Learn about new features in LINEAR software.
System Requirements
Learn more about the system requirements for using the LINEAR solutions.
Supported Norms and Standards
Learn which norms and standards support the LINEAR Solutions modules.
LINEAR Installation and Administration
Learn how to install, your LINEAR software, license and keep it up to date.
Getting Started
Get basic information about the structure, function and interaction of the LINEAR Solutions programs in AutoCAD and LINEAR Building.
Preparing and Editing Buildings and Architecture
Learn how to prepare drawings provided by an architect to create an architecture for building analysis.
Analyzing Buildings
Get information about the demands analysis of a building with LINEAR Building. The demands analysis includes the calculation of the heat load, the cooling load and the determination of the required air volumes.
Dimensioning Components
Learn how radiators, convectors, panel heating/cooling systems and concrete core activation systems and components of ventilation systems are designed based on the requirement analysis in LINEAR Building.
Create Pipe Run Scheme
Learn how to create pipe run schemes for pipe networks in LINEAR Building.
Calculate Pipe Run Schemes
Learn how to calculate pipe run schemes in LINEAR Building.
Inserting Components
Learn how to transfer radiators or chilled beams to a LINEAR Building connected CAD platform and insert symbols and components from the libraries into CAD.
Drawing Networks
Learn how to draw pipe and duct networks, connect components, generate schemes, and create slots and openings.
Calculating Networks
Learn how to calculate pipe and duct networks.
- Requirements for a Calculable Pipe and Duct Network
  Explains the requirements for a calculable pipe and duct network.
- About Classification
  Explains the concept of classifying components for the Rohr- und Kanalnetzberechnung.
- About Virtual Components
  Explains the concept of virtual components in pipe and duct network calculations.
- About Pipe Network Calculation Heating and Cooling
  Explains the concept of the pipe network calculation for heating and cooling.
- About Pipe Network Calculation Potable Water
  Explains the concept of the Rohrnetzberechnung Trinkwasser.
- About the Pipe Network Calculation for Wastewater and Roof Drainage
  Explains the concept of the Rohrnetzberechnung Abwasser.
- About the Air Duct Network Calculation
  Explains the concept of the Kanalnetzberechnung.
- About Pipe Network Calculation for Gas
  Explains the concept of the Rohrnetzberechnung Gas.
- About the Pipe Network Calculation of District Networks
  Explains the concept of the Rohrnetzberechnung Quartiersnetze.
  - Settings
    Explains the concept of the Settings in the Rohr- und Kanalnetzberechnungs.
    - General Settings
      Explains the concept of general settings and boundary conditions in the Rohrnetzberechnung Quartiersnetze.
    - Valves
      Explains the role of valves in pipe network calculations for heating, domestic water, cooling and district networks.
    - Curve Data
      Explains the concept of curve data for use in the calculation of pressure losses for duct components or valves.
    - Material Data
      Explains the concept of material data in the pipe network calculations Heating, Potable Water, Waste Water, Cooling and District Networks.
      - Details on "Material Data"
        Information on the Material Data area in the Analyse command group of the Analyse tab in the Rohrnetzberechnung Quartiersnetze.
        Set Default Material
        Shows step-by-step how to set default material for automatic assignment in the Rohrnetzberechnung Quartiersnetze your project.
        Creating a Custom Material Combination
        Shows step-by-step how to create a custom material combination in the Rohrnetzberechnung Quartiersnetze .
        Manually Assigning Material Combination
        Shows step-by-step how to manually assign material combinations to pipes in Rohrnetzberechnung Quartiersnetze .
        Performing a Manual Material Change
        Shows step by step how to carry out a manual change of material on the inside of a trench section in Rohrnetzberechnung Quartiersnetze .
        Define Connection Sets for Material Combinations
        Shows step-by-step how to define connection sets for the primary and secondary system of material combinations in the Rohrnetzberechnung Quartiersnetze.
        Specify Delivery Options for Pipe Systems
        Shows step-by-step how to define delivery options for pipe systems in the Rohrnetzberechnung Quartiersnetze .
        Details on "Pipes and Connection Sets"
        Information on the Pipes and Connection Sets dialog in the Rohrnetzberechnung Quartiersnetze.
        About Pipe Tables
        Explains the concept of pipe tables in the Rohrnetzberechnung Quartiersnetze.
        Details on "Priorities (…)"
        Information about the Priorities (…)dialogs of the Rohrnetzberechnung Quartiersnetze.
        Details zu "Lieferoptioneneinstellungen"
        Information about the Delivery Options Settings dialog of the Rohrnetzberechnung Quartiersnetze.
    - Components
      Explains the concept of the Components section in Rohr- und Kanalnetzberechnungs.
  - Calculation
    Explains the concept of the calculation dialog in the Rohrnetzberechnung Quartiersnetze.
  - Pumps
    Explains the concept of Pumps in pipe network calculations for heating, potable water,, cooling and district networks.
- About Reports (Command Group)
  Explains the concept of the Reports command group on the Analyse tab of the Control Board.
Labeling and Dimensioning
Learn how to label components and sections in your drawing and how to dimension your drawing.
Output
Get basic information on creating output with AutoCAD, output in LINEAR Building and on the print mask editor.

Details zu "Lieferoptioneneinstellungen"

Information about the Delivery Options Settings dialog of the Rohrnetzberechnung Quartiersnetze.

In this dialog you can set the delivery options for the pipe systems.

You are here

Discipline District Networks ➤ Analyse Tab ➤ Command Group Analyse ➤ Material Data ➤ Pipes and Connection Sets … ➤ Delivery Options ...

Dialog Delivery Options in the LINEAR Solutions for Autodesk AutoCAD

Manufacturer, Pipe System, Delivery Option

Manufacturer: Select the manufacturer of the pipe system for which you want to specify the delivery options.

Pipe System: Select the pipe system for which you want to specify the delivery options.

Delivery Options: Select the desired delivery option for the pipe system. For bar stock, you specify the delivery length directly when making your selection (e.g., stick, 16m). For coil stock, you can adjust the delivery lengths in the Delivery Length table. Adjusted values are displayed in bold.

Table of Delivery Lengths

In this table, you specify the delivery lengths for the various nominal diameters and insulation levels of the pipe system forcoil stock. For bar stock (stick), the data in the table is for informational purposes only.


Column	Description
DN	Shows the nominal diameter of the pipe system.
Insulation Level	Displays the insulation level of the pipe system.
min. Length	Forcoil stock, this indicates the minimum delivery length of the pipe system. For bar stock (stick), the delivery length selected under Delivery Options is displayed.
max. Length	For coil stock, this indicates the maximum delivery length of the pipe system. For bar stock (stick), the delivery length selected under Delivery Options is displayed.
Delivery length	Forcoil stock, specify the delivery length based on the nominal diameter and insulation level of the pipe system. For bar stock (stick), the delivery length selected under Delivery Options is displayed.

Name	Zweck	Lebensdauer	Typ	Anbieter
CookieConsent	Speichert Ihre Einwilligung zur Verwendung von Cookies.	1 Jahr	HTML	Website
fe_typo_user	Ordnet Ihrem Browser eine Sitzung auf dem Server zu.	Sitzung	HTTP	Website

Name	Zweck	Lebensdauer	Typ	Anbieter
_ga	Wird verwendet, um Nutzer zu unterscheiden.	2 Jahre	HTML	Google
_gat	Wird verwendet, um die Anfragerate zu drosseln.	1 Tag	HTML	Google
_gid	Wird verwendet, um Nutzer zu unterscheiden.	1 Tag	HTML	Google
_ga_QTGLMF6700	Google Analytics Cookie der dazu dient die Anfragerate zu reduzieren.	2 Jahre	HTML	Google
_gcl_au	Wird von Google AdSense verwendet, um die Effizienz von Werbung zu testen.	3 Monate	HTML	Google
_clck	Speichert die Clarity-Benutzer-ID und die Einstellungen, die nur für diese Website gelten, im Browser. Dadurch wird sichergestellt, dass das Verhalten bei späteren Besuchen derselben Website der gleichen Benutzerkennung zugeordnet wird.	1 Jahre	HTML	Microsoft
_clsk	Verbindet mehrere Seitenaufrufe eines Benutzers zu einer einzigen Clarity-Sitzungsaufzeichnung.	366 Tag	HTML	Microsoft
_uetsid	Dies ist ein von Microsoft Bing Ads verwendetes Tracking Cookie. Es ermöglicht uns, auf einen Nutzer einzugehen, der bereits im Vorfeld unsere Webseite besucht hat.	1 Tag	HTML	Microsoft
_uetvid	Wird verwendet, um Besucher auf mehreren Webseiten zu verfolgen, um relevante Werbung basierend auf den Präferenzen des Besuchers zu präsentieren.	390 Tag	HTML	Microsoft
ln_or	Registriert statistische Daten über das Verhalten der Nutzer auf der Website. Wird vom Betreiber der Website für interne Analysen verwendet.	1 Tag	HTML	LinkedIn

LINEAR FÜR AUTODESK REVIT

LINEAR FÜR AUTODESK AUTOCAD

Details zu "Lieferoptioneneinstellungen"

Manufacturer, Pipe System, Delivery Option

Table of Delivery Lengths