Details on "ISSO 51 and 53" (Room Level)
Information on the area ISSO 51 and 53 in the Ventilation module in LINEAR Building.
You are here
General Room Data
The upper part of this view shows the room number, the room name, the set room temperature for heating case and the dimensions of the room (the latter not in cases where only the area was given). Room number, room name and room temperature can be edited directly, the room dimensions only after clicking 
.
Minimum Volume Flow Rate
The number of people influences the minimum air volume flow in the calculation according to ISSO 53 (Non-residential building). If the rooms are calculated according to ISSO 53, you can enter the number of people for this room manually here. The value entered manually is shown in bold. Manual changes to the number of people at this point have no effect on the number of persons in the general room data. Click on the 
button to enter either the value determined from the building regulations or the value from the general room data. If the value from the general room data is displayed, this is indicated by the entry P (e.g. "P = 0.75").
In the calculation according to ISSO 51, the minimum volume flow is calculated on an area-specific basis. The number of persons displayed was transferred from CAD when the building was entered and cannot be changed.