LINEAR Solutions 26 for AutoCAD

Details on "Design Temperatures"

Information on the Design Temperatures dialog for heat and cooling generators.

Before the first calculation, the system temperatures of heat and cooling generators must be defined in the dialog Design Temperatures if the supply and return temperatures have not already been defined.

You are here:

Project Tab ➤ Discipline ➤ Analyse Tab ➤ Command Group Analyse ➤ Calculation …

Generator

Displays the designations of the generators. You can adjust the designation in the technical data.

System Name

Defines the system name. For the sake of better differentiation when there are several systems, you may enter a name. This name will be displayed in the calculation dialog when selecting a system. Also when printing, you can select from the multiple systems that are available.

Fluid

Displays the medium used by the system. Clicking on opens the dialog Fluid, where you can adjust the fluid.

Temperatures

Defines the supply and return temperatures of the system. Click to select a pair of temperatures from the drop-down list or enter the temperatures manually. When entering values manually, you can enter the supply and return temperatures separated by a blank or by a slash.

Show

Shows the selected generator in the model.