Knowledge Base AutoCAD
Preparing and Editing Buildings and Architecture
Learn how to prepare drawings provided by an architect to create an architecture for building analysis.
Creating and Editing an Architecture
Explains the concept of creating and editing architectural models with the LINEAR Solutions.
Details on the "Create" Tab (Floor Plan and Model Planning)
Information on the command groups of the Create tab in the planning types 3D - Model planning, 2.5D - Model planning and 2D - Floor plan of the Architecture discipline.
Details on Walls, Ceilings, Columns
Information on the Walls, Ceilings, Columns command group of the Create tab in the 3D - Model planning, 2.5D - Model planning and 2D - Floor plan of the Architecture discipline.
Details on Support Columns<
Information about the Support Columns section.

New Features
Learn about new features in LINEAR software.
System Requirements
Learn more about the system requirements for using the LINEAR solutions.
Supported Norms and Standards
Learn which norms and standards support the LINEAR Solutions modules.
LINEAR Installation and Administration
Learn how to install, your LINEAR software, license and keep it up to date.
Getting Started
Get basic information about the structure, function and interaction of the LINEAR Solutions programs in AutoCAD and LINEAR Building.
Preparing and Editing Buildings and Architecture
Learn how to prepare drawings provided by an architect to create an architecture for building analysis.
- Linking an architecture
  Explains the concept of the IFC - Link Workflow and the IFC - Import Workflow in the context of the discipline Architecture.
- Creating and Editing an Architecture
  Explains the concept of creating and editing architectural models with the LINEAR Solutions.
  - Details on the "Create" Tab (Floor Plan and Model Planning)
    Information on the command groups of the Create tab in the planning types 3D - Model planning, 2.5D - Model planning and 2D - Floor plan of the Architecture discipline.
    - Details on "Storeys and Axes"
      Information on the command group Storeys and Axes of the Create tab in the discipline Architecture.
    - Details on Walls, Ceilings, Columns
      Information on the Walls, Ceilings, Columns command group of the Create tab in the 3D - Model planning, 2.5D - Model planning and 2D - Floor plan of the Architecture discipline.
      - Details on Architecture settings
        Information on the section Architecture settings.
      - Details on Rectangular Room <
        Information about the section Rectangular Room <.
      - Details on Walls <
        Information on the section Walls <.
      - Details on Ceiling <
        Information on the section Ceiling <.
      - Details on Support Columns<
        Information about the Support Columns section.
      - Details on Joist <
        Information on the section Joist <.
      - Details on Foundation <
        Information about the section Foundation <.
      - Details on Chimney <
        Information about the Chimney < section.
      - Details on Ceiling Grid <
        Information about the Ceiling Grid section.
      - Details on Tiles<
        Information about the section Tiles.
      - Details on Assign Material <
        Information on Assign material <.
    - Details on Windows, Doors
      Information on the Window, Doors command group of the Create tab in the 3D - Model planning, 2.5D - Model planning and 2D - Floor plan of the Architecture discipline.
    - Details on "Room Contours, Building Contours"
      Information on Room and Building Outlines on the Create tab in the planning types 2.5D - Model Planning and 3D - Model Planning of the discipline Architecture.
    - Details on "Steel Construction"
      Information about the command group Steel Construction on the Create tab in the discipline Architecture.
  - Details on "Architecture Analyse" (Model Planning)
    Information on the Analyse tab in the planning types 3D - Model Planning and 2.5D - Model Planning in the Architecture discipline.
Analyzing Buildings
Get information about the demands analysis of a building with LINEAR Building. The demands analysis includes the calculation of the heat load, the cooling load and the determination of the required air volumes.
Dimensioning Components
Learn how radiators, convectors, panel heating/cooling systems and concrete core activation systems and components of ventilation systems are designed based on the requirement analysis in LINEAR Building.
Create Pipe Run Scheme
Learn how to create pipe run schemes for pipe networks in LINEAR Building.
Calculate Pipe Run Schemes
Learn how to calculate pipe run schemes in LINEAR Building.
Inserting Components
Learn how to transfer radiators or chilled beams to a LINEAR Building connected CAD platform and insert symbols and components from the libraries into CAD.
Drawing Networks
Learn how to draw pipe and duct networks, connect components, generate schemes, and create slots and openings.
Calculating Networks
Learn how to calculate pipe and duct networks.
Labeling and Dimensioning
Learn how to label components and sections in your drawing and how to dimension your drawing.
Output
Get basic information on creating output with AutoCAD, output in LINEAR Building and on the print mask editor.

Details on Support Columns<

Information about the Support Columns section.

You are here:

Project tab ➤ Discipline Architecture ➤ Planning type 3D - Model planning / 2.5D - Model planning / 2D - Floor planning ➤ Create tab ➤ Command group Walls, Ceilings, Columns

Support Columns <

This command allows you to draw individual support columns, but also arrangements of columns at the current construction height. If you enable the Use Architectural Objects option in the Architecture Settings in 3D - Model planning or 2.5D - Model planning, AEC objects are created.

Angular, Round

Defines whether rectangular or round support columns are drawn.

Width, Depth

Defines the width and depth of rectangular support columns. You can pick the value of respective field from the drawing with .

Diameter

Defines the diameter of round support columns. can be used to pick the diameter from the drawing.

: Queries the clear height from the Storeys dialog.

Number, Distance for Horizontally and Vertically

Specify the number of support columns and the distance between them if you would like to draw a support grid with multiple support columns arranged horizontally and vertically.

Name	Zweck	Lebensdauer	Typ	Anbieter
CookieConsent	Speichert Ihre Einwilligung zur Verwendung von Cookies.	1 Jahr	HTML	Website
fe_typo_user	Ordnet Ihrem Browser eine Sitzung auf dem Server zu.	Sitzung	HTTP	Website

Name	Zweck	Lebensdauer	Typ	Anbieter
_ga	Wird verwendet, um Nutzer zu unterscheiden.	2 Jahre	HTML	Google
_gat	Wird verwendet, um die Anfragerate zu drosseln.	1 Tag	HTML	Google
_gid	Wird verwendet, um Nutzer zu unterscheiden.	1 Tag	HTML	Google
_ga_QTGLMF6700	Google Analytics Cookie der dazu dient die Anfragerate zu reduzieren.	2 Jahre	HTML	Google
_gcl_au	Wird von Google AdSense verwendet, um die Effizienz von Werbung zu testen.	3 Monate	HTML	Google
_clck	Speichert die Clarity-Benutzer-ID und die Einstellungen, die nur für diese Website gelten, im Browser. Dadurch wird sichergestellt, dass das Verhalten bei späteren Besuchen derselben Website der gleichen Benutzerkennung zugeordnet wird.	1 Jahre	HTML	Microsoft
_clsk	Verbindet mehrere Seitenaufrufe eines Benutzers zu einer einzigen Clarity-Sitzungsaufzeichnung.	366 Tag	HTML	Microsoft
_uetsid	Dies ist ein von Microsoft Bing Ads verwendetes Tracking Cookie. Es ermöglicht uns, auf einen Nutzer einzugehen, der bereits im Vorfeld unsere Webseite besucht hat.	1 Tag	HTML	Microsoft
_uetvid	Wird verwendet, um Besucher auf mehreren Webseiten zu verfolgen, um relevante Werbung basierend auf den Präferenzen des Besuchers zu präsentieren.	390 Tag	HTML	Microsoft
ln_or	Registriert statistische Daten über das Verhalten der Nutzer auf der Website. Wird vom Betreiber der Website für interne Analysen verwendet.	1 Tag	HTML	LinkedIn

LINEAR FÜR AUTODESK REVIT

LINEAR FÜR AUTODESK AUTOCAD

Details on Support Columns<