Details on Walls <

This command allows you to draw single-shell or double-shell interior and exterior walls in 2D and 3D mode. Determine the wall thickness(es) and, if necessary, the wall height in advance. If values are already present in the Storeys dialog, the current clear storey height is automatically suggested as the wall height.

You are here:

Project tab ➤ Discipline Architecture ➤ Planning type 3D - Model planning / 2.5D - Model planning ➤ Create tab ➤ Command group Walls, Ceilings, Columns

Walls <

This command allows you to draw single-shell or double-shell interior and exterior walls in 2D and 3D mode according to your settings.

Specify whether you want to draw a single-shell or a double-shell wall.

Thickn.1, Thickn.2, Thickn.3

Enter the layer thickness for the wall/walls. For a double-shelled wall, Thickness 2 indicates the distance between the inner and outer shell (air layer). Thickness 3 then indicates the thickness of the second wall layer. With the buttons you can pick the value from the drawing for the respective field.

Height

Enter the height of the wall in this field. can be used to pick the Height from the drawing. With , you can set the value for the Height to the storey height stored in the Storeys dialog.

Interior Wall

Enabled: An interior wall will be drawn when the command is executed. When drawing, you are first asked for an outer wall to which you want to connect.