LINEAR Building Synchronize with Room Book
Shows step by step how to synchronize modified data from an imported room book back into the room book in LINEAR Building.
Before you begin
You have imported a room book and made changes to room parameters or created additional rooms in LINEAR Building. You want to synchronize the current data with the room book.
Navigate to:
Procedure
- Click Synchronize Room Book
. The dialog Synchronize Room Book opens.
Note: If you have synchronized your project with a CAD program in the meantime, you will receive a message before synchronization to check the synchronization settings and adjust them if necessary to avoid data loss. - Check the settings for Worksheet, ID Column, Header Row, and Data From Row. Attention: Ensure that you do not specify a column with room book data for the ID Column to avoid data loss. Normally, the default setting can be retained.
- Add missing parameter assignments in the Room Parameters column if needed.
- Select from the dropdown list Synchronization Configuration the entry Default Synchronization Setting - Export Only.
- Click on Synchronize. If you have created additional rooms in LINEAR Building, a message appears asking whether the additional rooms should also be created in the room book.
- Click on Yes, create if you want to transfer the rooms with all available data to the room book.
Results
The adjusted data was synchronized with the specified room book, taking the selected configurations into consideration.