Details on Components (Potable water)
Information about the Components section in Potable Water Pipe Network Calculation.
You are here:
All settings specified in the section Components are saved in the components and pipes of the project.
Classify ...
Opens the Classify dialog after selecting components, in which the calculation types of the selected components are displayed. If required, you can also use this dialog to adjust the assigned calculation types and assign a calculation type to unclassified components.
Technical data ...
After selecting a component, this button opens the corresponding component dialog, in which technical data relevant for the calculation for that particular component can be entered.
Connections ...
If during the calculation you have used manufacturer pipe material, this button will be activated. You can assign connectors to components to have appropriate manufacturer connector pieces listed in the parts list.
Copy <
Copies the technical data from the component dialogs and the lengths of edited pipes if the corresponding checkboxes are activated.
First select the original component or pipe for which you want to copy the data. Then transfer the copied data to a selection of components or to all components of the same type.
| Element | Description |
|---|---|
| Component data | Enabled: The component type, the technical data from the component dialogs and any assigned connections of the original component are copied. For pipes, the definition of the pipe materials is copied. |
| Lengths | Enabled: Edited lengths of pipes are copied. |
| for all components | Enabled: When copying, the data of the original component is copied for all components of the same type or all pipes. Disabled: Select the components or pipes that will receive the copied data of the original component. |
Reset <
Resets changed technical data or edited lengths of pipes if the corresponding checkboxes are activated. The reset can be carried out for all components of the same type or for a selection.
| Element | Description |
|---|---|
| Component data | Enabled: The component type, the technical data from the component dialogs and any assigned connections of the original component are reset. For pipes, the definition of the pipe material is reset. |
| Lengths | Enabled: Edited lengths of pipes are reset. |
| for all components | Enabled: The data of all components of the same type or of all pipes are reset. Disabled: Select the components or pipes whose data is to be reset. |