Jump directly to main navigation Jump directly to content

Details on Pipes and Insulations

Information about the Pipes and insulations dialog in the pipe network calculations heating, cooling and potable water.

In this dialog, assign insulation and pipe systems for calculation to pipes. The settings are saved in the project.

You are here:

AssistantsTrade / Drawing typeCalculationMaterial dataPipes and insulations ...

Applies to: Heating, Cooling, Potable water.

To fully access all functions, the pipe network needs to be detected. If needed, click Calculate beforehand.

Active

Define which materials are to be used for the automatic allocation and calculation of the pipe networks by clicking in the corresponding row. Either automatic positioning or replacement of the pipe material read from the model and insulation from the model can be activated.

Name

List of the available material combinations. In the calculation, the material definition of the respective enabled category is assigned to the pipes in the model.

The categories Pipe material from model and Insulation from model only contain entries if the model has been designed with corresponding materials.

Pipes rigid/bendable, Insulation material

Defines the material for rigid or bendable pipes and for insulation material. Clicking on opens a context menu in all categories (except Standard) with the following options:
  • Select...: Opens the Pipe Tables or Insulation Tables dialog, where you can select the desired manufacturer and material.
  • Reset to default: Replaces the current material selection with the selection of the Standard category. In the Standard category, clicking opens the Pipe Tables dialog.
  • Reset to material from model: Replaces the current material selection with the material originally determined in the model.
  • Apply from...: Copies the material selection from one of the other available entries.
  • no insulation: Removes the existing insulation selection.

Button

Description

Assign

Use this command to manually assign the currently selected material combination to selected section parts in the model. Depending on the selected discipline, a number of different filters is available.

Select the pipe type to which you want to assign the selected material combinations.

overwrite local settings

Enabled: When assigning the material combination, original or previously made local material settings are overwritten.

Disabled: When assigning the material combination, original or previously made local material combinations remain unchanged.

Delete

Removes an assigned material combination from selected sections in the project and assigns the Standard material combination to the selection. Depending on the selected discipline, a number of different filters is available.

Select at which pipe type the material settings are to be deleted.

Inquire

This command is used to mark the assigned material combination in the table after selecting a pipe.

Visualization

After assignment the different properties can be shown in the model. The pipes are displayed in color and a legend with assigned colors is displayed.