Details on Pipe Run Settings
Information about the dialog Pipe run settings in the Gas Pipe Network Calculation.
The pipe run names will be displayed in all dialogs and in the printouts. The Material protection selection under passive protection influences the material output of the pipes in the material list.
You are here:
Passive protection
Activated: You can select a passive protection and assign it to the section parts.
Deactivated: The passive protection is not used during assignment.
Pipe run name
Activated: You can enter a pipe run name and assign it to the section parts.
Deactivated: The pipe run name is not used during assignment.
Assign <
After clicking this button, select the section parts that are to receive the selected passive protection or pipe run name.
Show data: Name, Passive protection, Pipe materials
Select the property to be displayed in the drawing using the Show < colored command.
Tag: Displays a previously assigned pipe run name.
Passive protection: Displays a previously assigned passive protection.
Pipe materials: Displays the pipe systemsvia the Pipe tables or assigned with the Pipe material... < command in the Components section.
Show <
Displays the previously assigned pipe run names, passive protection or material systems in color in the drawing.