E-Learning - 3D Rohrleitungsbau

Course: 3D Pipe Construction

Content

  1. Introduction
    • 1.1 Introduction
  2. Room Construction
    • 2.1 Creating the Room Geometry
    • 2.2 The Steel Construction Module
  3. Placing the Components
    • 3.1 Placing the Manifold
    • 3.2 Creating and Placing a Tank
    • 3.3 Placing the Boiler
  4. Pipe Routing
    • 4.1 Pipe Routing
    • 4.2 Installing the Shut-Off Device
  5. Documentation
    • 5.1 Creating Section Views
    • 5.2 Labeling
    • 5.3 Output
E-Learning - LINEAR Design 3D Pipe&Power - creating a room geometry
To begin with, we create a room geometry in which we will later install the heating system.
E-Learning - LINEAR Design 3D Pipe&Power -
We will also show you how you can use our steel construction tools to create stairs, for example.
E-Learning - LINEAR Design 3D Pipe&Power -
We then configure and position the components such as the boiler, manifold and a tank.
E-Learning - LINEAR Design 3D Pipe&Power -
All components are then piped and connected, including all the necessary valves and fittings.
E-Learning - LINEAR Design 3D Pipe&Power -
Finally, we create the documentation. In addition to labeling, we show you how to create sections and output to plans.
E-Learning - LINEAR Design 3D Pipe&Power -
All components can then be found in the parts or item list and can be put out in various formats.

Click here for the course

  • E-learning
  • AutoCAD / CADinside
  • Heating
  • Construction
  • Manufacturer CAD Libraries

Write a comment

You must be logged in to comment.