Details on the Section "Hygiene Functions"
Information on the Hygiene Functions area on the Analyse tab of the discipline Potable Water.
In this section you will find tools for monitoring and visualizing water flows and other factors from a hygienic point of view.
You are here:
Ambient Temperatures …
Opens the Ambient Temperatures dialog in which you can edit the ambient temperatures of cold and hot water pipes. These temperatures are used in the simulation of different load cases.
Network Temperatures ...
Opens the Network Temperatures dialog, in which you can simulate time-dependent temperature curves.
Flushing qty. determination
Here you will find a list of the basic LINEAR sanitary parameters that contain the number of elements in a sanitary component. The Flush volume determination < function checks the flush volumes between two fixtures on the same flow path. After selecting the fixtures, the data for the flush volumes are listed in tabular form in the Pipe sections dialog.
Tapping process <
The simulation of tapping processes clearly shows how far pipes are flushed through during a tapping process. After clicking on Tapping Process <, select an appliance in the drawing so that its tapping process can then be simulated in the drawing. Press Enter to end the simulation in the drawing. The simulation data is then listed in tabular form in the Pipe Sections dialog.
Ejection process <
Opens the Temporal Temperature Curve dialog, in which you can simulate the time after which hot water emerges at a specified test temperature for hot water appliances.