Detail on Room List
Information about the area Room List in the dimensioning of domestic ventilation.
You are here:
Room List
If a ventilation zone has been selected in the building structure, the ventilation system can only be configured for the current ventilation zone in the Room List area. If no manufacturer or preset has been selected, this is possible by clicking on Options....
General Information
Number/Name
Specifies the number and name of the room.
: Opens the dialog in which you can adjust the settings of the current structure level.
Calculate Volume Flow Rates according to
Specifies whether the volume flows for the rooms are determined automatically in accordance with DIN 1946-6 or entered manually. If you select manual, you can transfer the values determined in accordance with DIN 1946-6 from the ventilation concept to the V total columns in a subsequent query.
Design all rooms!
Selects all ventilation components for the current ventilation zone in accordance with the requirements from the ventilation concept. If no ventilation unit has yet been selected, the Central Unit for [...] dialog opens, in which a ventilation unit can be selected and set.
Options
Opens a context menu with buttons to open the dialogs for global settings, for the ventilation system and for the building data. Furthermore, you can display messages, enter comments and undo dimensioning.
Room Table
| Column | Description |
|---|---|
| Room Type | Displays the room type by means of the following icons:
|
| Type of Outlet | Displays the air vent type in the room with the following icons:
|
| Location | Displays the names of storeys, apartments or rooms depending on the selected structure level. |
| Width, Length, Area | Specifies the width, length and area of the room. |
| Supply Air Factor | Specifies the factor for the distribution of the target volume flow rate to the individual rooms. Living rooms, for example, have the supply air factor 3.0. You can adjust the assignment of supply air factors in the LINEAR Building configuration. |
| V total | Specifies the total target volume flow rate determined for the room. |
| V valve | Specifies the air flow rate per valve. |
| Name | Specifies the name of the air vent. Clicking on |
| Distance Manif.->Air outlet | Specifies the distance between the manifold and the air vent. |
| Set | Clicking |
| Pressure Loss | Specifies the pressure loss of the air vent. |
| ! | Indicates an error. |
- Supply Air Rooms
- Extract Air Rooms
- Supply/Extract Air Rooms
- Overflow Air Rooms
- Room not ventilated
- Supply Air Outlet
- Extract Air Outlet
opens a drop-down list in which a different air vent can be selected. If you select a different air vent, you can change all air vents with the same set to the newly selected set.
opens the dialog where you can get information about the design data, air vent, feed pipe, manifold as well as the central unit and change these settings.