Jump directly to main navigation Jump directly to content

Details on Methods in the Settings

Information about the Methods tab in the Settings dialog of the dynamic cooling load calculation.

You are here:

Module overviewCooling load dynamicProject levelSettings (...) Method

Dialog settings Linear Building

General information

Method selection for the cooling load calculation

This is where you define the calculation method for the cooling load of your project. You can choose between calculations according to ASHRAE 2013 - commercial cooling load calculation and according to VDI 2078 - June 2015.

Settling for the cooling load calculation

For ASHRAE only the periodic oscillation of the cooling load calculation with CDD (Cooling Design Day) is available. VDI 2078 calculates with CDP (Cooling Design Period) as standard, but cooling load calculation with CDD (Cooling Design Day) is also available.

Number of working days per week

Specifies the number of working days per week.

Global activation

In this area you can globally control whether an internal load is taken into account in the cooling load calculation. In this way you can assess the influence of individual loads on the overall result. Deactivate an internal load to exclude it from the calculation.

Note:

The capacities of the enveloping surfaces are only available in the calculation according to ASHRAE and can therefore only be activated/deactivated there.