Details on the Toolbar in Connection with the Design of Radiators and Cooling Convectors

In connection with AutoCAD, this mode decides whether a 2D element or a cuboid with the set VDI detailing is drawn in when a radiator is drawn in. Drawn radiators are colored differently depending on the mode in order to visually detect which elements were placed in which mode in the connected CAD program.

Shows the selected element in the associated pipe run.

Opens a context menu in which you can assign loads to all rooms at the current structure level or reassign all existing loads at the structure level.

If LINEAR Building loses the connection to the elements in AutoCAD after drawing in radiators or cooling convectors, e.g. due to a crash, drawn elements can be linked again storey by storey using this function.

Inserts a new radiator or cooling convector at room level. When dimensioning the new radiator/cooling convector, any existing radiators or cooling convectors are taken into account and re-dimensioned if necessary.

Switches to the room view of the room whose circular zone, radiator/cooling convector or diffuser is selected in a table, the building structure or the pipe run view.