Allows to adjust the maximum allowable surface temperatures, which are taken into account when designing the surfaces with systems. The maximum permitted values are normally not exceeded during automatic design or a warning is displayed in the Log window.
You are here:
The limit surface temperatures of the individual components (floors, ceilings and walls) can be adjusted. Limit surface temperatures for floors in bathrooms and border zones can be determined separately for radiant heating. For radiant cooling, the fields for floors in bathrooms and border zones are deactivated.
The suggested values are specifications from standards or values agreed with the manufacturers.
Consider temperature excesses in feed pipes during dimensioning
Enabled: If the limit temperature is exceeded in the feed pipes, the output is reduced to counteract the exceeding of the limit temperature. If the limit temperature is nevertheless exceeded, a message is displayed in the Log.
Deactivated (default setting): The temperature limits in the feed pipes can be exceeding during the dimensioning and a message concerning this will be is output in the Log .
Standard: Restores the default setting.