LINEAR Revit V26

Details on General Ventilation Zone Data

Information on the General Ventilation Zone Data section of the Heat Load module at ventilation zone level.

You are here:

Module Overview ➤ Heat Load ➤ Ventilation Zone Level ➤ General Ventilation Zone Data

Ventilation System

Ventilation System:

Here you can set a ventilation system for the ventilation zone in deviation from the project settings. The setting from the project level is adopted for now.

Design Pressure Difference of the OuAO: The design pressure difference is transferred from the Ventilation module if the module is activated and a value is available for this parameter.

η Value (Heat Recovery):

Enter the efficiency of the heat recovery system in percent. It is only used if a supply and extract air system is available. The efficiency is then used to calculate the supply air temperature of supply air rooms.