In this dialog you configure global settings for your radiant cooling and heating. Defaults set here can be adjusted at room level.
You are here:
Properties Radiant Cooling and Radiant Heating
Dynamic Capacity
Enabled: Calculates the required output of the radiant heating and cooling, depending on the room air temperature.
Charac. Curve
Characteristic value which, combined with the temperature difference between room and system temperature, describes the characteristic curve of the surface temperature control. This value can be taken from the technical data of the planned surface temperature control.
Temperature
Mean temperature of the supply and return temperature of the surface temperature control.
Absolute Performance Target
Enabled: Limits the output of the radiant heating and cooling control to a value to be entered per room.
Specific Allowed Capacity
Enabled: Limits the output of the radiant heating and cooling control to a fixed value per square meter.
Regulated
Enabled: The radiant cooling regulates its output according to demand.
Disabled: The available power is always fully applied.