Entering a Room Rectangle
Shows step-by-step how to create a room rectangle using the Enter room rectangle command.
Before you begin
You want to generate 3D walls from a 2D template and after entering the storey outline you want to enter room outlines for rectangular rooms to define rooms. The room contour created with Enter room rectangle is used, for example, to automatically generate the walls.
Requirements:
You have loaded a 2D template based on which you can draw a room outline.
Navigate to:
Procedure
- Under Storeys ..., select the corresponding storey to set the correct construction height.
- Click Enter room rectangle <.
- On the storey drawing, pick two diagonally opposite corners of the room one after the other. The room area is highlighted in red and the room tag is attached to the cursor.
- Click to define the insertion point for the room tag in your drawing. The Room data dialog opens.
- Enter the room data in the dialog.
- Confirm your entries with OK. The room tag is then filled with the data.
Results
You have entered the room outline, placed the room tag and entered the corresponding room data. Enter the data for the remaining rooms in the same way.