Details for Room Contours, Building Contours

You are here:

Project tab ➤ Discipline Architecture ➤ Planning type 3D - Model planning / 2.5D - Model planning ➤ Create tab ➤ Command group Room and Building Contours

Storeys ...

The Storeys... section displays existing storeys. Clicking the Storeys ... button opens the Storey table dialog where you can parameterize the storeys and import storey data.

Load underlay ...>

This command allows you to insert files in DWG or PDF format as well as image files into the drawing. These files are assigned to the current drawing as an external reference.

If you would like to insert several underlays at different heights, you should create a Table of storeys beforehand and set Storeys on upon the other in Drawing type.

If you would like to insert several underlays at the same height next to each other, you should first set the Drawing type to Storeys side by side.

Align underlay <

This command allows you to rotate and scale the underlay to the correct size at the same time. This command is particularly useful to adjust and align scanned plans. Since the horizontal scaling (x-axis) and vertical scaling (y-axis) are queried, even compressed or stretched external references may be straightened again.

Edit room data <

You can use the Edit room data < command to subsequently edit room data such as room name, room number or temperatures and place missing room stamps. You specify the label file used for the room stamps in the Edit room data < area. You can also use this area to swap the label file used for room stamps that have been placed.

To edit room data, click on the room stamp of the corresponding room after activating the command. To place missing room stamps, you must click on the outline of the corresponding room.

Enter storey contour < / Enter room contour < / Enter room rectangle <

In order to generate 3D walls on the basis of the 2D template, you will have to define these walls by tracing the storey and room outlines. This is done in the planning types 3D - Model Planning and 2.5D - Model Planning with the commands Enter Storey Outline and Enter Room Contour or Enter Room Rectangle.

Search room contour <

In building detection, room information is no longer obtained from the three-dimensional walls, but also from the room contour, among other things. Therefore it is necessary to modify the room contours when walls have been moved or stretched, in order to detect the modified room using the automatic detection.

In the case of a room surrounded by three-dimensional walls, the Search room contour command automatically creates the room contour. Room contours can be stretched or modified as usual by using the grips or by means of the command Add contour points and Delete contour points.

Enter shaft <

You can define shafts using the Enter shaft < command. Shafts do not receive any room data or a room label. They are not taken into account during Building detection and are not transferred to LINEAR Building. However, the adjacent situation of room components adjacent to such shafts is correctly passed to LINEAR Building.

Enter roof area <

First define the roof area and then generate the walls. Thereupon, the walls will be adjusted correspondingly and be shortened or chamfered. After having generated the walls, the roof areas may not be deleted. Otherwise the automatic detection and the data transfer to LINEAR Building will not work correctly.

Before starting the Enter roof area command, the course of the roof area should be known. Each sloped plane is a roof area on its own. Thus, a gable roof consists of two separate roof areas.

The first three roof area points require heights that define the slope. For the other points of the roof no heights are required. Therefore make sure you know the heights of the first three definition points.

Add contour points <

You may add contour points to previously traced storey and room outlines or you may delete them in order to incorporate plan modifications into your drawing easily. If the modifications of a room shall be regarded by the automatic detection it is necessary to adjust the room contour, too.

Delete contour points <

You may add contour points to previously traced storey and room outlines or you may delete them in order to incorporate plan modifications into your drawing easily. If the modifications of a room shall be regarded by the automatic detection it is necessary to adjust the room contour, too.

Generate walls ...

As soon as all relevant storey and room outlines and roof areas have been entered, the program may generate 3D walls automatically.

Convert (architectural) rooms ...

This command can be used to convert room objects in AutoCAD Architecture format (AEC Spaces) to LINEAR room contours. Subsequently, these room objects can be used for automatic building detection with LINEAR Building. The conversion is particularly useful when spaces already contain metadata. This is the case when spaces have been created by importing an *.IFC file.

Align UCS <

By using the Align UCS command is you may adjust the current user coordinate system. You may thus apply orthogonally orientated command such as Enter room rectangle and Enter shaft also to rooms which are not rectangular to the drawing surface.