Details on Usage Profiles
Information on the Usage profiles dialog in the dynamic cooling load calculation.
Usage profile sets
Usage profiles define the percentage of internal loads in hourly cycles over a 24-hour period and are grouped into usage profile sets.
You can manage usage profiles at any level (project, building section, story, apartment or room). However, the assignment of usage profiles to internal loads is only done on the project level via the Assignment of internal loads button, and on room level via the selection of the corresponding internal load.
You are here:
Diagram
In the diagram, the percentage of the usage profile set that was last selected in the table is displayed for the working days (WD) or for the non-working days (NWD).
Table
Set name
Name of the usage profile set. You can edit the name by clicking in the field. F5 or click in an empty line creates a new set. F6 deletes the selected set.
WD
Displays the set parameters of the profile for the working day. Click 
opens the corresponding profile.
NWD
Displays the set parameters of the profile for the non-working day. Click opens the corresponding profile.
Used in
Indicates in how many rooms of the building structure the selected usage profile set is used.