Locating Sections
Shows step-by-step how to locate sections in the model.
Before you begin
You want to locate the pipe network sections in the model to facilitate handling and navigation in plans.
Requirements:
-
The pipe network is closed an can be calculated.
-
The pipe network is detected.
Note:
You can perform the localization in different categories - even in parallel. The procedure in each case is basically identical and is shown in this task using the example of the tab Apartment/Rooms.
Navigate to:
Applies to: Heating, Potable water.
Procedure
- Click on the tab Apartment/Rooms tab.
- In the area Name, click in an empty row and enter a name for the first entry. Repeat the step for all apartments/rooms in the model.
- Select the first row and click Assign <. The Localization dialog is hidden and the pickbox is activated.
- Use the pickbox to select all the sections of the model that belong to the selected apartment/room. Confirm the selection with Enter.
- Repeat the process for all necessary localizations.
Results
The created locations have assigned and can be used for labeling.