Knowledge Base AutoCAD
Calculating Networks
Learn how to calculate pipe and duct networks.
About the Pipe Network Calculation of District Networks
Explains the concept of the Rohrnetzberechnung Quartiersnetze.
Settings
Explains the concept of the Settings in the Rohr- und Kanalnetzberechnungs.
Material Data
Explains the concept of material data in the pipe network calculations Heating, Potable Water, Waste Water, Cooling and District Networks.
Details on "Material Data"
Information on the Material Data area in the Analyse command group of the Analyse tab in the Rohrnetzberechnung Quartiersnetze.
Details on "Pipes and Connection Sets"
Information on the Pipes and Connection Sets dialog in the Rohrnetzberechnung Quartiersnetze.
About Pipe Tables
Explains the concept of pipe tables in the Rohrnetzberechnung Quartiersnetze.
Details on “Pipe Tables"
Information on the Pipe Tables dialog at Rohrnetzberechnung Quartiersnetze.

New Features
Learn about new features in LINEAR software.
System Requirements
Learn more about the system requirements for using the LINEAR solutions.
Supported Norms and Standards
Learn which norms and standards support the LINEAR Solutions modules.
LINEAR Installation and Administration
Learn how to install, your LINEAR software, license and keep it up to date.
Getting Started
Get basic information about the structure, function and interaction of the LINEAR Solutions programs in AutoCAD and LINEAR Building.
Preparing and Editing Buildings and Architecture
Learn how to prepare drawings provided by an architect to create an architecture for building analysis.
Analyzing Buildings
Get information about the demands analysis of a building with LINEAR Building. The demands analysis includes the calculation of the heat load, the cooling load and the determination of the required air volumes.
Dimensioning Components
Learn how radiators, convectors, panel heating/cooling systems and concrete core activation systems and components of ventilation systems are designed based on the requirement analysis in LINEAR Building.
Create Pipe Run Scheme
Learn how to create pipe run schemes for pipe networks in LINEAR Building.
Calculate Pipe Run Schemes
Learn how to calculate pipe run schemes in LINEAR Building.
Inserting Components
Learn how to transfer radiators or chilled beams to a LINEAR Building connected CAD platform and insert symbols and components from the libraries into CAD.
Drawing Networks
Learn how to draw pipe and duct networks, connect components, generate schemes, and create slots and openings.
Calculating Networks
Learn how to calculate pipe and duct networks.
- Requirements for a Calculable Pipe and Duct Network
  Explains the requirements for a calculable pipe and duct network.
- About Classification
  Explains the concept of classifying components for the Rohr- und Kanalnetzberechnung.
- About Virtual Components
  Explains the concept of virtual components in pipe and duct network calculations.
- About Pipe Network Calculation Heating and Cooling
  Explains the concept of the pipe network calculation for heating and cooling.
- About Pipe Network Calculation Potable Water
  Explains the concept of the Rohrnetzberechnung Trinkwasser.
- About the Pipe Network Calculation for Wastewater and Roof Drainage
  Explains the concept of the Rohrnetzberechnung Abwasser.
- About the Air Duct Network Calculation
  Explains the concept of the Kanalnetzberechnung.
- About Pipe Network Calculation for Gas
  Explains the concept of the Rohrnetzberechnung Gas.
- About the Pipe Network Calculation of District Networks
  Explains the concept of the Rohrnetzberechnung Quartiersnetze.
  - Settings
    Explains the concept of the Settings in the Rohr- und Kanalnetzberechnungs.
    - General Settings
      Explains the concept of general settings and boundary conditions in the Rohrnetzberechnung Quartiersnetze.
    - Valves
      Explains the role of valves in pipe network calculations for heating, domestic water, cooling and district networks.
    - Curve Data
      Explains the concept of curve data for use in the calculation of pressure losses for duct components or valves.
    - Material Data
      Explains the concept of material data in the pipe network calculations Heating, Potable Water, Waste Water, Cooling and District Networks.
      - Details on "Material Data"
        Information on the Material Data area in the Analyse command group of the Analyse tab in the Rohrnetzberechnung Quartiersnetze.
        Set Default Material
        Shows step-by-step how to set default material for automatic assignment in the Rohrnetzberechnung Quartiersnetze your project.
        Creating a Custom Material Combination
        Shows step-by-step how to create a custom material combination in the Rohrnetzberechnung Quartiersnetze .
        Manually Assigning Material Combination
        Shows step-by-step how to manually assign material combinations to pipes in Rohrnetzberechnung Quartiersnetze .
        Performing a Manual Material Change
        Shows step by step how to carry out a manual change of material on the inside of a trench section in Rohrnetzberechnung Quartiersnetze .
        Define Connection Sets for Material Combinations
        Shows step-by-step how to define connection sets for the primary and secondary system of material combinations in the Rohrnetzberechnung Quartiersnetze.
        Specify Delivery Options for Pipe Systems
        Shows step-by-step how to define delivery options for pipe systems in the Rohrnetzberechnung Quartiersnetze .
        Details on "Pipes and Connection Sets"
        Information on the Pipes and Connection Sets dialog in the Rohrnetzberechnung Quartiersnetze.
        About Pipe Tables
        Explains the concept of pipe tables in the Rohrnetzberechnung Quartiersnetze.
        Selecting Pipe System
        Shows step-by-step how to select a pipe system for material combinations in the Pipes and Connection Sets dialog
        Details on “Pipe Tables"
        Information on the Pipe Tables dialog at Rohrnetzberechnung Quartiersnetze.
        Details on "Priorities (…)"
        Information about the Priorities (…)dialogs of the Rohrnetzberechnung Quartiersnetze.
        Details zu "Lieferoptioneneinstellungen"
        Information about the Delivery Options Settings dialog of the Rohrnetzberechnung Quartiersnetze.
    - Components
      Explains the concept of the Components section in Rohr- und Kanalnetzberechnungs.
  - Calculation
    Explains the concept of the calculation dialog in the Rohrnetzberechnung Quartiersnetze.
  - Pumps
    Explains the concept of Pumps in pipe network calculations for heating, potable water,, cooling and district networks.
- About Reports (Command Group)
  Explains the concept of the Reports command group on the Analyse tab of the Control Board.
Labeling and Dimensioning
Learn how to label components and sections in your drawing and how to dimension your drawing.
Output
Get basic information on creating output with AutoCAD, output in LINEAR Building and on the print mask editor.

Details on “Pipe Tables"

Information on the Pipe Tables dialog at Rohrnetzberechnung Quartiersnetze.

In this dialog, you select the pipe systems for the material combinations of the Pipes and Connection Sets dialog. You will find suitable pipe systems from all installed manufacturers as well as neutral systems under the Custom manufacturer. If required, you can deactivate certain nominal diameters for calculation and sizing.

You are here:

Project Tab ➤ Discipline District Networks ➤ Analyse Tab ➤ Command Group Analyse ➤ Material Data ➤ Pipes and Connection Sets … ➤ (Column Lines/Pipes)

Pipe lists dialog in the District Networks discipline of the LINEAR Solutions for Autodesk AutoCAD

Manufacturer

Drop-down list for selecting the manufacturer. The manufacturer Custom contains neutral pipe systems that can be adjusted and expanded. The input is automatically saved in an external file.

System

Selection of all systems contained in the selected manufacturer data set or in Custom.

Table of System Variants

In the upper table, the system versions of the selected pipe system are displayed for selection if the system contains different versions. The systems under Custom are expandable. To create a new system, click into a free row the table.


Column	Description
Name	The name of the pipe system is used for labeling and in bills of materials.
Code	The abbreviation of pipe system names is used for labeling.
Roughness	The rougness of the pipe material is used to calculate pressure losses.

<< Details, Details >>

Shows or hides the lower dimension table.

Default

Configures the standard material of the corresponding discipline, if this is not already selected.

Table of Dimensions

All available dimensions of the selected system or system variant are displayed in the table below. By deactivating certain dimensions, you specify that these dimensions are not considered during calculation and sizing.

The dimensions under Custom are expandable. To create a new dimension, click in an empty row of the table. Dimensions are automatically sorted by size.


Column	Description
Active	Only activated dimensions are considered during calculation. By deactivating the field, you can specifically exclude certain dimensions from calculation and sizing. The deactivated dimensions are still available for manual selection in the calculation dialog in the Trench Sections area.
DN Pipe	Indicates or defines the available nominal diameters of the pipe system.
Ø Interior	Indicates or defines the inner diameter of the nominal diameter.
Ø Exterior	Indicates or defines the outer diameter of the nominal diameter.
DN Valves	Indicates or defines the connection size of built-in fittings.
Max. Nominal Pressure	Indicates or sets the maximum nominal pressure of the nominal diameter.
Min. Velocity	Indicates or sets the minimum flow velocity for the nominal diameter. If this value is not met, the next smaller nominal diameter is used in the sizing.
Max. Velocity	Indicates or sets the maximum flow velocity for the nominal diameter. If this limit is exceeded, the next larger nominal diameter is used in the sizing.
Dimension Name	Displays or sets the nominal diameter. The name of the dimension is used for labeling and in bills of materials.
Insulation Level	Indicates or sets the insulation level.
Ø Exterior with Insulation	Indicates or defines the outer diameter including insulation.
U-value	Indicates or sets the U-value.

Name	Purpose	Lifetime	Type	Provider
CookieConsent	Saves your consent to using cookies.	1 year	HTML	Website
fe_typo_user	Assigns your browser to a session on the server.	session	HTTP	Website

Name	Purpose	Lifetime	Type	Provider
_ga	Used to distinguish users.	2 years	HTML	Google
_gat	Used to throttle request rate.	1 day	HTML	Google
_gid	Used to distinguish users.	1 day	HTML	Google
_ga_QTGLMF6700	Google Analytics cookie to throttle the request rate.	2 years	HTML	Google
_gcl_au	Used by Google AdSense to experiment with advertisement efficiency.	3 months	HTML	Google
_clck	Persists the Clarity User ID and preferences, unique to that site, on the browser. This ensures that behavior in subsequent visits to the same site will be attributed to the same user ID.	1 years	HTML	Microsoft
_clsk	Connects multiple page views by a user into a single Clarity session recording.	366 day	HTML	Microsoft
_uetsid	This is a tracking cookie used by Microsoft Bing Ads. It allows us to target a user who has visited our website before.	1 day	HTML	Microsoft
_uetvid	Used to track visitors across multiple websites to present relevant advertising based on the visitor's preferences.	390 day	HTML	Microsoft
ln_or	Registers statistical data on users’ behaviour on the website. Used for internal anyalyzes by the website operator.	1 day	HTML	LinkedIn

LINEAR DLA AUTODESK REVIT

LINIOWY DLA AUTODESK AUTOCAD