Knowledge Base AutoCAD
Calculating Networks
Learn how to calculate pipe and duct networks.
About the Pipe Network Calculation of District Networks
Explains the concept of the Rohrnetzberechnung Quartiersnetze.
Settings
Explains the concept of the Settings in the Rohr- und Kanalnetzberechnungs.
Material Data
Explains the concept of material data in the pipe network calculations Heating, Potable Water, Waste Water, Cooling and District Networks.
Details on "Material Data"
Information on the Material Data area in the Analyse command group of the Analyse tab in the Rohrnetzberechnung Quartiersnetze.
Specify Delivery Options for Pipe Systems
Shows step-by-step how to define delivery options for pipe systems in the Rohrnetzberechnung Quartiersnetze .

New Features
Learn about new features in LINEAR software.
System Requirements
Learn more about the system requirements for using the LINEAR solutions.
Supported Norms and Standards
Learn which norms and standards support the LINEAR Solutions modules.
LINEAR Installation and Administration
Learn how to install, your LINEAR software, license and keep it up to date.
Getting Started
Get basic information about the structure, function and interaction of the LINEAR Solutions programs in AutoCAD and LINEAR Building.
Preparing and Editing Buildings and Architecture
Learn how to prepare drawings provided by an architect to create an architecture for building analysis.
Analyzing Buildings
Get information about the demands analysis of a building with LINEAR Building. The demands analysis includes the calculation of the heat load, the cooling load and the determination of the required air volumes.
Dimensioning Components
Learn how radiators, convectors, panel heating/cooling systems and concrete core activation systems and components of ventilation systems are designed based on the requirement analysis in LINEAR Building.
Create Pipe Run Scheme
Learn how to create pipe run schemes for pipe networks in LINEAR Building.
Calculate Pipe Run Schemes
Learn how to calculate pipe run schemes in LINEAR Building.
Inserting Components
Learn how to transfer radiators or chilled beams to a LINEAR Building connected CAD platform and insert symbols and components from the libraries into CAD.
Drawing Networks
Learn how to draw pipe and duct networks, connect components, generate schemes, and create slots and openings.
Calculating Networks
Learn how to calculate pipe and duct networks.
- Requirements for a Calculable Pipe and Duct Network
  Explains the requirements for a calculable pipe and duct network.
- About Classification
  Explains the concept of classifying components for the Rohr- und Kanalnetzberechnung.
- About Virtual Components
  Explains the concept of virtual components in pipe and duct network calculations.
- About Pipe Network Calculation Heating and Cooling
  Explains the concept of the pipe network calculation for heating and cooling.
- About Pipe Network Calculation Potable Water
  Explains the concept of the Rohrnetzberechnung Trinkwasser.
- About the Pipe Network Calculation for Wastewater and Roof Drainage
  Explains the concept of the Rohrnetzberechnung Abwasser.
- About the Air Duct Network Calculation
  Explains the concept of the Kanalnetzberechnung.
- About Pipe Network Calculation for Gas
  Explains the concept of the Rohrnetzberechnung Gas.
- About the Pipe Network Calculation of District Networks
  Explains the concept of the Rohrnetzberechnung Quartiersnetze.
  - Settings
    Explains the concept of the Settings in the Rohr- und Kanalnetzberechnungs.
    - General Settings
      Explains the concept of general settings and boundary conditions in the Rohrnetzberechnung Quartiersnetze.
    - Valves
      Explains the role of valves in pipe network calculations for heating, domestic water, cooling and district networks.
    - Curve Data
      Explains the concept of curve data for use in the calculation of pressure losses for duct components or valves.
    - Material Data
      Explains the concept of material data in the pipe network calculations Heating, Potable Water, Waste Water, Cooling and District Networks.
      - Details on "Material Data"
        Information on the Material Data area in the Analyse command group of the Analyse tab in the Rohrnetzberechnung Quartiersnetze.
        Set Default Material
        Shows step-by-step how to set default material for automatic assignment in the Rohrnetzberechnung Quartiersnetze your project.
        Creating a Custom Material Combination
        Shows step-by-step how to create a custom material combination in the Rohrnetzberechnung Quartiersnetze .
        Manually Assigning Material Combination
        Shows step-by-step how to manually assign material combinations to pipes in Rohrnetzberechnung Quartiersnetze .
        Performing a Manual Material Change
        Shows step by step how to carry out a manual change of material on the inside of a trench section in Rohrnetzberechnung Quartiersnetze .
        Define Connection Sets for Material Combinations
        Shows step-by-step how to define connection sets for the primary and secondary system of material combinations in the Rohrnetzberechnung Quartiersnetze.
        Specify Delivery Options for Pipe Systems
        Shows step-by-step how to define delivery options for pipe systems in the Rohrnetzberechnung Quartiersnetze .
        Details on "Pipes and Connection Sets"
        Information on the Pipes and Connection Sets dialog in the Rohrnetzberechnung Quartiersnetze.
    - Components
      Explains the concept of the Components section in Rohr- und Kanalnetzberechnungs.
  - Calculation
    Explains the concept of the calculation dialog in the Rohrnetzberechnung Quartiersnetze.
  - Pumps
    Explains the concept of Pumps in pipe network calculations for heating, potable water,, cooling and district networks.
- About Reports (Command Group)
  Explains the concept of the Reports command group on the Analyse tab of the Control Board.
Labeling and Dimensioning
Learn how to label components and sections in your drawing and how to dimension your drawing.
Output
Get basic information on creating output with AutoCAD, output in LINEAR Building and on the print mask editor.

Specify Delivery Options for Pipe Systems

Shows step-by-step how to define delivery options for pipe systems in the Rohrnetzberechnung Quartiersnetze .

Before you begin

You want to define the delivery options for the pipe systems of the primary and secondary system of a material combination.

Navigate to

Discipline District Networks ➤ Analyse Tab ➤ Command group Analyse ➤ Material Data ➤ Pipes and Connection Sets …

Dialog "Pipes and Connection Sets" of the Discipline District Networks in the LINEAR Solutions for Autodesk AutoCAD

Procedure

Click on the Delivery Options ... button.

The Delivery Options Settings dialog opens
Select the Manufacturer of the primary system of the material combination, the Pipe System assigned to the primary system and the desired Delivery Option using the corresponding drop-down lists.

Tip: The delivery option coil stands for coil goods, the stick entries stand for bar stock.

Selecting a stick entry directly specifies the delivery length of the stick goods (e.g. with stick, 16m), which is then listed in the Delivery Length table.
Selection of the coil entry lists the different nominal diameters of the pipe system with their insulation level in the Delivery Length table.
When selecting thecoil Delivery Option, enter the desired delivery lengths for the individual nominal diameters with their insulation level in the Delivery Length column.
Follow steps 2 and, if necessary, 3 for the secondary system of the material combination as well.
Close the dialog with OK.

Results

The delivery options for the primary and secondary system of the material combination have been defined.

Name	Purpose	Lifetime	Type	Provider
CookieConsent	Saves your consent to using cookies.	1 year	HTML	Website
fe_typo_user	Assigns your browser to a session on the server.	session	HTTP	Website

Name	Purpose	Lifetime	Type	Provider
_ga	Used to distinguish users.	2 years	HTML	Google
_gat	Used to throttle request rate.	1 day	HTML	Google
_gid	Used to distinguish users.	1 day	HTML	Google
_ga_QTGLMF6700	Google Analytics cookie to throttle the request rate.	2 years	HTML	Google
_gcl_au	Used by Google AdSense to experiment with advertisement efficiency.	3 months	HTML	Google
_clck	Persists the Clarity User ID and preferences, unique to that site, on the browser. This ensures that behavior in subsequent visits to the same site will be attributed to the same user ID.	1 years	HTML	Microsoft
_clsk	Connects multiple page views by a user into a single Clarity session recording.	366 day	HTML	Microsoft
_uetsid	This is a tracking cookie used by Microsoft Bing Ads. It allows us to target a user who has visited our website before.	1 day	HTML	Microsoft
_uetvid	Used to track visitors across multiple websites to present relevant advertising based on the visitor's preferences.	390 day	HTML	Microsoft
ln_or	Registers statistical data on users’ behaviour on the website. Used for internal anyalyzes by the website operator.	1 day	HTML	LinkedIn

LINEAR DLA AUTODESK REVIT

LINIOWY DLA AUTODESK AUTOCAD