Jump directly to main navigation Jump directly to content

Details on Pipe Run

Information on the Pipe run section in panel heating/cooling.

You are here:

Module overviewPanel heating/Panel coolingPipe run viewPipe run levelPipe run

Panel heating pipe run Linear Building

No.

Defines the number and name of the pipe run.

Hydraulic balancing

Defines the setting for taking the manifolds into account when calculating the hydraulic balancing.

Balance circuits only per manifold

Enabled: Each manifold is considered individually and its heating/cooling circuits are hydraulically balanced with each other. In each manifold, this creates at least one unfavorable circuit where the valve setting is open. Each manifold requires a control valve for this purpose.

Balance circuits via all manifolds on pipe run

Enabled: The circuits of all manifolds of a pipe run are considered simultaneously and hydraulically balanced with each other. This creates at least one unfavorable circuit, where the valve setting is open, in each pipe run only. The individual manifolds do not require additional control valves.

Close gaps in port numbering on manifolds

If there are gaps in a manifold’s connection, you can close them with the function.