Knowledge Base Revit
Analyzing Buildings
Get information about the demands analysis of a building with LINEAR Building. The demands analysis includes the calculation of the heat load, the cooling load and the determination of the required air volumes.
Cooling Load, dynamic
Select a method for determining the cooling load to suit the location and requirements of your project.
Calculating Dynamic Cooling Load According to ASHRAE
Find out how to calculate the dynamic cooling load for your building according to ASHRAE.
About Setting Options in the Dynamic Cooling Load Calculation
Explains the concept of settings in the dynamic cooling load.
About Solar Radiation
Explains the concept of solar radiation and its computation in the cooling load calculation.
Details on the Ground Reflection Coefficient
Information on the Ground Reflection Coefficient dialog in the dynamic cooling load calculation.

New Features
Learn about new features in LINEAR software.
System Requirements
Learn more about the system requirements for using the LINEAR solutions.
Supported Norms and Standards
Learn which norms and standards support the LINEAR Solutions modules.
LINEAR Installation and Administration
Learn how to install, your LINEAR software, license and keep it up to date.
Getting Started
Get basic information about the structure, function, and interaction of the LINEAR Solutions programs in Revit and LINEAR Building.
Preparing Building
Learn how architects prepare plans and models to create a building model for building analysis.
Pre-conception design
Learn how to plan the positionining and dimensioning of technical control centers and create the route concept in collaboration with all parties involved in the planning.
Analyzing Buildings
Get information about the demands analysis of a building with LINEAR Building. The demands analysis includes the calculation of the heat load, the cooling load and the determination of the required air volumes.
- About Building Detection
  Explains the concept of building detection in LINEAR Building from a connected CAD program.
- Heat Load
  Select a calculation method for the calculation of the heat load according to the location and requirements of your project.
- Cooling Load Short Procedure
  Learn how to calculate a cooling load for your building based on the short procedure of VDI 2078 (1996), section 6.
- Cooling Load, dynamic
  Select a method for determining the cooling load to suit the location and requirements of your project.
  - Calculating Dynamic Cooling Load According to VDI 2078
    Find out how to calculate the dynamic cooling load for your building according to VDI 2078.
  - Calculating Dynamic Cooling Load According to ASHRAE
    Find out how to calculate the dynamic cooling load for your building according to ASHRAE.
    - About Modular Operation
      Explains the general operating concept in the dialogs of the Dynamic Cooling Load module.
    - Details on Dynamic Cooling Load
      Information on the overview page of the dynamic cooling load calculation at project level.
    - Details on Dynamic Cooling Load, Room Level
      Information on the overview page of the dynamic cooling load calculation at room level.
    - About Setting Options in the Dynamic Cooling Load Calculation
      Explains the concept of settings in the dynamic cooling load.
      - Selecting the Calculation and Stabilization Procedure
        Shows step-by-step how to select the calculation and stabilization procedure for your project.
      - Details on Options in the Settings
        Information on the Options tab in the Settings dialog of the cooling load calculation.
      - About Operating Profiles
        Explains the concept of operating profiles.
      - About Solar Radiation
        Explains the concept of solar radiation and its computation in the cooling load calculation.
        Setting Overall Solar Options
        Shows step by step how you set solar options for your complete project.
        Details on Solar Options in the Settings
        Information about Solar Options tab in the Settings dialog of the dynamic cooing load calculation.
        Details on the Ground Reflection Coefficient
        Information on the Ground Reflection Coefficient dialog in the dynamic cooling load calculation.
        Details on Shading Coefficient
        Information on the Shading Coefficient dialog in the dynamic cooling load calculation.
      - Details on Lighting in the Settings
        Information on the Lighting tab in the Settings dialog of the dynamic cooling load calculation.
      - Set Humidity Balance
        Shows step-by-step how to enable and set the humidity balance for your project.
      - Details on Configuration - Dynamic Cooling Load
        Information on the Dynamic Cooling Load section in the Configuration dialog for LINEAR Building.
    - About Meteorological Data for the Cooling Load Calculation according to ASHRAE
      Explains the concept of meteorological data in conjunction with the dynamic cooling load calculation based on ASHRAE.
    - About Temperature Profile Sets
      Explains the concept of temperature profile sets.
    - About Use Profile Sets
      Explains the concept of use profile sets.
    - About Internal Loads
      Explains the concept of internal loads.
    - About Windows
      Explains the concept of windows in LINEAR Building.
    - About Results
      Explains the results display concept in the concept of dynamic cooling load calculation and the year simulation.
- Ventilation
  Explains the concept of determining air volumes for residential and non-residential buildings.
Dimensioning Components
Learn how radiators, convectors, panel heating/cooling systems and concrete core activation systems and components of ventilation systems are designed based on the requirement analysis in LINEAR Building.
Create Pipe Run Scheme
Learn how to create pipe run schemes for pipe networks in LINEAR Building.
Calculate Pipe Run Schemes
Learn how to calculate pipe run schemes in LINEAR Building.
Inserting Components
Learn how to insert components from the LINEAR CAD Browser, from the libraries and configurators of the Library tab or from LINEAR Building into a model.
Constructing Networks
Learn how to create pipe and duct networks, design slots and openings and manage discipline-related reports and tasks.
Calculating Networks
Learn how to calculate pipe and duct networks.
Creating a Scheme
Get information on the workflow Scheme for the disciplines Potable Water and Heating in Revit.
Construction Design
Get information about the workflow Construction design in connection cable trays as well as pipe and duct networks.
Labeling
Learn how to label pipe/duct sections and components in the model.
Output
Obtain information on the output of calculation results and material extracts in your CAD program in LINEAR Building and on the output in LINEAR Building. In addition, find out how you can customize the layout of the output documents using the print mask editor.
Troubleshooting
Get information about possible sources of errors when working with LINEAR Solutions.

Details on the Ground Reflection Coefficient

Information on the Ground Reflection Coefficient dialog in the dynamic cooling load calculation.

You are here:

Module Overview ➤ Dynamic Cooling Load ➤ Project Level ➤ Settings ➤ Solar Options ➤ (Reflection Coefficient pg (Ambient, Outside) - Calculator Symbol

Reflection factor ground Linear Building

Selection

Here you will find a number of templates, among others from ASHRAE. Select a template that most closely matches the reflection coefficient of the ground at your project site.

To the user standards directory

Clicking this link opens the Windows file explorer in the directory of the file Bodenreflexion.cld. If necessary, you can adapt these in a text editor.

Name	Purpose	Lifetime	Type	Provider
CookieConsent	Saves your consent to using cookies.	1 year	HTML	Website
fe_typo_user	Assigns your browser to a session on the server.	session	HTTP	Website

Name	Purpose	Lifetime	Type	Provider
_ga	Used to distinguish users.	2 years	HTML	Google
_gat	Used to throttle request rate.	1 day	HTML	Google
_gid	Used to distinguish users.	1 day	HTML	Google
_ga_QTGLMF6700	Google Analytics cookie to throttle the request rate.	2 years	HTML	Google
_gcl_au	Used by Google AdSense to experiment with advertisement efficiency.	3 months	HTML	Google
_clck	Persists the Clarity User ID and preferences, unique to that site, on the browser. This ensures that behavior in subsequent visits to the same site will be attributed to the same user ID.	1 years	HTML	Microsoft
_clsk	Connects multiple page views by a user into a single Clarity session recording.	366 day	HTML	Microsoft
_uetsid	This is a tracking cookie used by Microsoft Bing Ads. It allows us to target a user who has visited our website before.	1 day	HTML	Microsoft
_uetvid	Used to track visitors across multiple websites to present relevant advertising based on the visitor's preferences.	390 day	HTML	Microsoft
ln_or	Registers statistical data on users’ behaviour on the website. Used for internal anyalyzes by the website operator.	1 day	HTML	LinkedIn

LINEAR DLA AUTODESK REVIT

LINIOWY DLA AUTODESK AUTOCAD

Details on the Ground Reflection Coefficient

Selection

To the user standards directory