LINEAR Solutions 26 for Revit

Deriving a Scheme

Shows step-by-step how to convert a model into a scheme.

Before you begin

You have constructed a pipe network and want to convert it into a scheme.

Requirements

  • All network objects have been correctly classified.
  • The network has no open ends.
  • Symbols have have been assigned to all the components in the project.
  • The correct storey level reference is selected in the dialog Adjust Storeys.

Navigate to

Project tab ➤ Disciplines ... ➤ Workflows: Scheme ➤ Create tab

Applies to the Scheme workflow.

Design tab of the Control Board in the Workflow Scheme of the LINEAR Solutions for Autodesk Revit

Procedure

  1. Open the Convert Model to Scheme area by clicking on .
  2. From the drop-down lists, select the desired discipline and the building part for which the scheme is to be created.
  3. Optional: Click on Adjust Storeys and if necessary correct the values for the floor structure and suspended ceiling. Close the dialog with a click on OK.
  4. Click Convert Model to Scheme <.
    You will be prompted to select an element from the pipe network.
  5. Click on a component of the pipe network for which you want to create a scheme.
    The Convert Model to Scheme dialog opens.
    “Convert Model to Scheme” in the Workflow of the LINEAR Solutions for Autodesk Revit
  6. Optional: Customize the name for the drafting view of the scheme.
  7. Specify whether the scheme should be opened for possible post-processing in the Edit Scheme dialog of the Scheme Editor before creating the drafting view.
    Note: You can also edit previously created schemes using the Schema Editor.
  8. Check the remaining values and settings in the dialog Convert Model to Scheme and make any necessary adjustments.
  9. Click OK.

Results

The scheme has been created and saved as a drafting view, or it is open for editing in the Edit Scheme dialog. If necessary, click Apply in the top right corner of the dialog Edit Scheme to create and save a drafting view of the edited scheme.

If necessary, you can modify the scheme at any time using the tools at the bottom of the tab Design: Scheme and/or with the function Scheme Editor < of the tab.