Details on Component Data for Slide Valves
Information on the component data dialog for Slide valves.
You are here:
Name
Specifies the name of the component. You can modify the name. Clicking 
restores the default setting.
Calculation
Nominal diameter: You can either select a fixed nominal diameter, or the calculation is determined with the selection dimensioning. After the calculation, the calculated values will be displayed below the field under Current.
Zeta: You can enter an additional pressure loss as zeta value. When calculating according to work sheet G11 of the ÖVGW standard, the Zeta-value will be determined by the program for all components.
Connections
The connection type can be selected from the drop-down list. When choosing Standard, the connection is set by the program.