LINEAR Solutions 26 for AutoCAD

Draw Section Lines

Shows step-by-step how to insert section lines into a drawing.

Before you begin

You want to draw a labeled section line in your drawing.

Navigate to

“Labeling and Output” Tab ➤ Command Group “Label Drawing” ➤ Section/View Labeling

Sections and view labeling area in the LINEAR Solutions for Autodesk AutoCAD

Procedure

  1. Set the desired Text Height.
  2. Select the section arrow to be used from the list of section arrows.
  3. Specify the line style and line weight in the Section Line area using the drop-down lists.
  4. Use the color field to specify the color of the section line.
  5. Specify whether the section line is only indicated.
  6. Define the projection of the section line at the start and end point.
  7. Click on Section/View Labeling.
  8. Define the support points of the section line in your drawing.
    Defining the support points for the section line in the drawing
  9. Confirm your entry by right-clicking or pressing Enter.
    The prompt to set the section depth appears in the command line.
  10. Use the mouse to set the section depth to determine the orientation of the labeling at the start and end point of the section line and confirm this by right-clicking.Defining the section depth for the section line in the drawing
    The Section View Labels dialog opens.
  11. Enter the name with which the start and end points are labeled and confirm your entry.
    The section line is inserted into the drawing.Labeled section line in the drawing

Results

You have drawn a labeled section line in the model area of your drawing.