Details on Storey Options
Information about the dialog Storey Options of the scheme generators Heating, Potable Water and Gas.
You are here:
)
Heights (for all pipe runs)
Suspended Ceiling, Floor Construction
The heights you enter here apply to all pipe runs on the current selected storey.
Total Height
The total height is only displayed and cannot be changed here. To adjust the value, change the Storey Height ().
Pipe Arrangement (in current pipe run)
top, bottom, temperature-optimized, under ceiling, above ceiling
You can define the pipe arrangement individually for each pipe run and for each storey. With temperature-optimized pipe arrangement, critical heat transfers are prevented by laying hot water and cold water pipes separately from each other.
| Pipe Routing | Construction in the scheme |
|---|---|
| top, underneath ceiling |  |
| top, above ceiling |  |
| bottom, underneath ceiling |  |
| bottom, above ceiling |  |
Transfer: Allows you to transfer the selected pipe routing to other pipe runs or storeys. The following options are available for the transfer:
- to all storeys in current pipe run
- to all pipe runs in the same storey
- to all pipe runs and storeys
Ascending Pipe Run
R-90 Pipe Partitioning - activated: In the case of wall or ceiling grommets, the ascending pipe run is fitted with a pipe partitioning of fire resistance classification R90.
Transfer: Allows to transfer the R-90 pipe partitioning to other pipe runs or storeys. The following options are available for the transfer:
- to all storeys in current pipe run
- to all pipe runs in the same storey
- to all pipe runs and storeys