Details on Scheme Generator Waste Water
Information about the scheme generator of the trade Waste Water in LINEAR Building.
The scheme generator is located on the Scheme tab. Here you can create calculable pipe run schemes for sanitary systems with a few settings. After that, you can perform the pipe network calculation and output the scheme, calculation results and material list. The scheme generator always displays the complete pipe run scheme regardless of the selected level in the Building Structure. When you select a storey in the Building Structure, the corresponding level is highlighted in the pipe run scheme.
You are here:
Symbols overview
Depending on the trade, the different symbols are available on the left side of the scheme generator. You drag and drop the symbols into the scheme. A drop-down list is available for the waste water trade, allowing you to select symbol lists from different DIN standards.
Scheme view
Displays the scheme with the inserted symbols and connections in the existing storeys and enables you to edit them.
: The storeys in the pipe run scheme are taken from the structure of the LINEAR Building project. The button allows to create additional storeys directly in the scheme. These storeys are available in the whole project and are also displayed in the Building Structure.
Symbole der Schemadarstellung
You can move, copy, delete the symbols of the schematic representation and assign them to other pipe runs. Furthermore, you can move or copy symbols to another pipe run. You can use the context menus of the symbols to define the connection variant and call up the component data, among other things.
Pipe Sections of the Schematic Representation
As soon as symbols have been inserted into the scheme, the individual pipe sections are displayed as brown lines. Click on a section in the scheme to open the Pipe Section Data dialog. In the Pipe Section Data dialog, you can adjust the data of the respective pipe section.
Pipe Run Buttons of the Storeys 
Each storey in your project has a pipe run button. Clicking on the button opens the corresponding context menu, which you can use to open the storey options or copy storeys, among other things.
Numbered pipe run buttons of the schematic view 
Under the pipe run scheme, the pipe runs are listed numerically next to each other. You can use the context menus of the buttons to open the pipe run options of the respective pipe run, among other things. An individual name can be assigned to each pipe run, which can be entered in the field above and will be displayed. Use the buttons to add further pipe runs to the left or right. After adding more pipe runs, a red symbol appears to the left or right of the field with the pipe run name, depending on the position of the selected pipe run. These symbols represent the distances of the pipe runs to the neighboring pipe runs. Click on the icons to open the Pipe Section Data dialog where you can configure the pipe section.