Editing the Dimensioned Radiators/Cooling Convectors for a Room
Shows step-by-step how to check the radiators or cooling convectors after a quick dimensioning and edit radiators or cooling convectors in the less favorably dimensioned rooms.
Before you begin
You would like to rework radiators or cooling convectors of unfavorably designed rooms in detail.
Requirement:
You have already carried out a quick dimensioning.
Navigate to:
Procedure
- In the project overview, check the designed radiators or cooling convectors in fields marked red. Note:
Fields marked in red indicate that a value determined during automatic dimensioning, such as the target capacity or mass flow, is not sufficient or that limit values are exceeded.
- Change the height, lengths or depth of the radiator or cooling convector, for example, until there is no more red marking in the project view.
- If necessary, replace radiators or cooling convectors by clicking in the model name column on the
button and selecting a different radiator or cooling convector. LINEAR Building Outputs a dialog, in which you can decide whether you would like to replace all radiators or cooling convectors with the newly selected model.
Results
You would like to edited radiators or cooling convectors of unfavorably designed rooms in detail.