Jump directly to main navigation Jump directly to content

Using T-piece Connection

Shows step by step how to connect two pipes or a component and a pipe using a T-piece.

Before you begin

Two pipes or a component and a pipe should be automatically connected by a T-piece. The function is well suited for connecting sanitary components to waste water pipes.

Requirements:

  • One of the two pipes or the component has an open end.

  • The distance between the open end and the pipe is large enough to be able to construct a connection.

Navigate to:

Project tabDisciplineConstruction tab

Applies to: heating, potable water, waste water, ventilation, cooling, gas, fire protection.

Initial situation:

Procedure

  1. Click T-piece connection.
  2. Select an open end and a pipe or duct.
  3. Select the angle for the T-piece and confirm with Apply.

    Different variants for the situation are shown.

  4. Select the required variant using and confirm with Apply.

Results

The component is connected to the pipe.