Jump directly to main navigation Jump directly to content

Replace bends (90°/2x 45°)

Shows step-by-step how to exchange a 90° bend for two 45° bends or vice versa in a wastewater pipe network.

Before you begin

You want to change the bend connection between two wastewater pipes.

Requirements:

The connection between the wastewater pipes has already been designed with a 90° bend or two 45° bends.

Navigate to:

Project tabWaste waterConstruction tab

Procedure

  1. Click on Replace bends (90/45) <.
  2. Select the bend connection in the wastewater network.

Results

The original bend in the transition was changed to a 90° bend and two 45° bends respectively.

90° 2*45°