Labeling Radiators or Cooling Convectors in the CAD Program

Shows step-by-step how to label radiators or cooling convectors placed in the CAD program from LINEAR Building.

Before you begin

You would like to label out radiators or cooling convectors that are already placed in the CAD program from LINEAR Building.

Requirements:

  • You have designed the radiators or or cooling convectors.

  • You have opened a CAD program.

  • You have placed the radiators or cooling convectors in the CAD program.

Navigate to:

Module overview ➤ Radiator/Cooling convectors ➤ Structural level

Procedure

  1. In the toolbar, click to set up the connection to your CAD program.
    Note:

    If the connection is already active, the button is highlighted. When the connection is active, additional CAD buttons are also activated in the menu bar.

  2. In the Radiator dimensioning or Cooling convector dimensioning dialog, click in the line of the radiator or cooling convector that you would like to refresh.
  3. Click the button.

    LINEAR Building Changes to the CAD program.

  4. In the CAD program, label the selected radiator or cooling convector.